Trailer plug wiring

[Guest Close Guest]

I was wiring a electric break controller today and noticed that at the 7 pin plug there is a blue wire in place for electric breaks. I had a look but can not see where the plug wires connect to the car. It goes through a grommet then I loose it.
Does someone know where the trailer wiring plugs into the car wiring? It would be good to be able to use the wire that is already there.

Thanks
Scott

[Chippy Addicted PP Member Find all posts View Profile Close Chippy]

Hey Scott

If its anything like mine ... all of the wires for the 7 pin plug were connected at the plug .... and when I followed them all back into the car the blue wire was taped back onto itself .... out of harms way and waiting for someone to install a brake controller. :lol: :lol: :lol:

It still meant I had to run a bit of wire from the controller to the back left corner of the car ... where the wire was terminated ..... but it certainly saved all the extra buggering around.

Cheers
Chippy

[Guest Close Guest]

Thanks for the reply Chippy. I had a hunt around in the back left of the car and didn't find the wires I was after. However I have the fridge and draws in the way so looking isn't all that easy so I have obviously just missed it. Will have another look
Scott

[Chippy Addicted PP Member Find all posts View Profile Close Chippy]

I had to unscrew and pull up the rear kickplate and then get in behind the plastic interior panel, near the cubby hole for the jack, before I found it.

Cheers
Chippy

[Guest Close Guest]

thanks for that, I will have another look tomorrow and let you know how I go.
Scott

[ntp Addicted PP Member Find all posts View Profile Close ntp]

Re: Trailer plug wiring

Added a heavy duty in-car charging system today along with a 50 Amp rear Anderson plug to connect to our new camper trailer







(Click to enlarge following pics)