Looking at putting an auxiliary distribution box inside the cabin to feed low power equipment, Phones, MP3 etc. Eventually all this will be taken from the 2nd battery when I get around to installing it but in the meantime I will use existing 12v feeds.
After removing the glove box I notice there are two connectors which can be accessed via the cut out in the LH side of the inner glove box shell. (see image)
I have to confirm the pins to be sure but a quick check with the meter I am almost sure showed switched and constant +5v and +12v.
Anybody know what this connector is for?
A search has not revealed anything that I can see.
After removing the glove box I notice there are two connectors which can be accessed via the cut out in the LH side of the inner glove box shell. (see image)
I have to confirm the pins to be sure but a quick check with the meter I am almost sure showed switched and constant +5v and +12v.
Anybody know what this connector is for?
A search has not revealed anything that I can see.
Comment