Hi,
We've just taken our vehicle in to ARB to have the suspension checked as it was leaning to the drivers side front and the rear was sagging lower than the front,
The springs we currently have are as follows:
Front : OME 881
Rear : OME 892 300KG
They have suggested to us that the front springs need swapping over, the drivers is about 13mm lower than the right hand side which they say "maybe" because the A & B springs for the font were put in on the wrong sides, and also that spacers are need for the rear. We have them installed for the last 16months, with about 200KG of weight.
Is it normal to have A & B side springs and are spacers needed as standard for 300KG hd springs?
We've just taken our vehicle in to ARB to have the suspension checked as it was leaning to the drivers side front and the rear was sagging lower than the front,
The springs we currently have are as follows:
Front : OME 881
Rear : OME 892 300KG
They have suggested to us that the front springs need swapping over, the drivers is about 13mm lower than the right hand side which they say "maybe" because the A & B springs for the font were put in on the wrong sides, and also that spacers are need for the rear. We have them installed for the last 16months, with about 200KG of weight.
Is it normal to have A & B side springs and are spacers needed as standard for 300KG hd springs?
Comment