After reading the magnificent posts by many previous pradokit members I decided to tackle it myself. Someone mentioned aluminium square tubing and I checked this out at Bunnings. I bought 3 lengths(2.0m) of 25mm square tubing along with the appropriate platic connectors to suit my design. It proved to be flexible and enabled me to do the detail after I had got the basic shape correct.
Step1 was remove the third row seats. These weigh 40kg and I estimate my finished drawers are just under that, so a small nett gain, which I swalowed up by all the “junk” I have put in the drawers!
The following pictures explain most of the process.
slide 1.
slide 2
slide 3
slide 4
see part 2 for more
Step1 was remove the third row seats. These weigh 40kg and I estimate my finished drawers are just under that, so a small nett gain, which I swalowed up by all the “junk” I have put in the drawers!
The following pictures explain most of the process.
slide 1.
slide 2
slide 3
slide 4
see part 2 for more
Comment