Cheers mate, you've been a few steps ahead the whole time, thanks for your patience.
Announcement
Collapse
No announcement yet.
Rhino Rack Pioneer Tray - which size did you buy and why?
Collapse
X
-
There's also this post. Bold font was done by me.
Originally posted by Brains View PostGraphite Bullet, I have been in discussion with Rhino re CXB adaptors for 150 Prado rails. Here is my communication with Rhino so far...
Lisa,
Just sending you this email as an inquiry into a release date for a CXB clamp for the heavy duty roof racks to suit a 150 series Toyota Prado? Our previous corrospondance is outlined below.
Regards
Paul
Date: 9 April 2010 0:08:14 AEST
To: Lisa Campbell <[email protected]>
Subject: Re: Web Enquiry Rhino : Retailer Enquiry On 1/04/2010
Lisa,
Thankyou for the positive reply this time. It is positive that a company does listen to the consumers to try and meet their needs and requirements in the products that they produce. I do believe that by manufacturing a second sized CXB clamp for the heavy duty rails you will in fact please all the 150 series Prado owners as well as obtain new clients with vehicles that were not suited to the current CXB clamp especially as more and more vehicles are coming out with rails as standard equipment.
I will be waiting in anticipation for a release date on this new sized CXB clamp. Should you require a guinea pig to trial the new CXB clamp I would be more than happy to assist so as to be able to utilise my heavy duty bars and alloy rack sooner (somewhat selfish but anything to help out).
Rhino does make a quality product and as I have mentioned I have chosen your product over your competitors due to quality, functionality as well as the way it looks. I only recently purchased my Sunseeket awning and extension after looking at all the available options on the market and choosing the Rhino one on the design as well as quality. We also choose Rhino as our roof rack supplier on our work vehicles, so know that I am a fan of your product.
Looking forward to your update email advising on projected release date. If suitable I would be more than happy to comment on your pending production of a CXB clamp to suit the 150 series Prado on Pradopoint.com if you wish for this information to be released. I'm sure there are more than just myself that would like to use their Rhini racks on the new Prado.
Regards,
Paul
On 08/04/2010, at 23:45, "Lisa Campbell" <[email protected]> wrote:
Hi Paul,
Appreciate the feedback you have provided bellow regarding Rhino Rack not having available a Heavy Duty CXB Rail Clamp to suit the Toyota Prado 150 Series with Factory Rails.
Rhino Rack do look into all feedbacks and requests and in this case have acted to now put into development an adaptor to allow the Heavy Duty Bars to fit the Prado Rails. I am unable to provide a time frame of when this adaptor will be available. I will email you with an update once it comes to hand.
Thank You again for your Feedback!
Kind Regards
Lisa Campbell
Sales & Customer Service
RHINO-RACK AUSTRALIA
Phone: 02 9638 4744
Fax: 02 9638 4822
Email: [email protected]
Website: http://www.rhinorack.com.au
Sent: Tuesday, 6 April 2010 7:55 PM
To: Lisa Campbell
Subject: Re: Web Enquiry Rhino : Retailer Enquiry On 1/04/2010
Lisa,
Surely with the amount of new Prado's that will be purchased as well as other models that have a similar sized rail, a company like Rhino would manufacture a suitable clamp. I don't understand that you can make clamps for the sports rack to suit each different vehicles rail but only make one sized CXB type clamp to suit the heavy duty bars that I know many Prado owners have with a similar setup with the alloy basket. On the forum site Prado Point the fact about the non fitting CXB clamps has been discussed with negative comments.
The reason that I went with the Rhino brand with alloy basket was quality but also ease of being able to remove the basket with racks when not required. Therefore the scenario you offered does not suit my application.
I now have no option but to see what your opposition has to offer me.
In conclusion I believe that Rhino should reconsider the option of producing a 2nd different sized CXB clamp to suit the larger rails on the 150 series Prado. I know that Subaru Forresters have a larger height rail.
Regards,
Paul
On 01/04/2010, at 16:41, "Lisa Campbell" <[email protected]> wrote:
Hello Paul,
Thank you for your inquiry regarding a CXB leg suiting your new Toyota Prado 150 Series.
Due to the rails not being a standard size rail, Rhino will not be releasing a CXB style leg clamp to suit.
The rails are able to be removed to expose the 3 sets of points underneath. Would recommend the manufacture “Toyota” to remove the rails due to warranty reasons. Once rails are removed you can purchase the leg kits to suit the heavy duty bars and still fit your Alloy Tray, Shovel Holders, Jerry Cans & Sunseeker Awning.
The leg kits are available to purchase as a set of 6 legs (enough for all 3 points) or to purchase as individual points (2 legs per fixing points).
Part# RLCP23 (6 x H/Duty Leg Kit)
RRP: $285.00 inc gst
Or per individual point position (Front, Middle & Rear)
Part# RLCP23F (2 x H/duty Leg Kit – Front Position)
RRP: $95.00 inc gst
Part# RLCP23M (2 x H/duty Leg Kit – Middle Position)
RRP: $95.00 inc gst
Part# RLCP23R (2 x H/duty Leg Kit – Rear Position)
RRP: $95.00 inc gst
Please note the load rating on the roof rack system for the Toyota Prado 150 Series without Rails is:
2 x Bars = 75kg
3 x Bars = 100kg
You also need to take in account the drop in carrying capacity of 15% of the total load rating when you go off road.
If you require any further information please email me at [email protected] or contact Rhino Rack’s customer service team on 02 9638 4744.
Kind Regards
Lisa Campbell
Sales & Customer Service
RHINO-RACK AUSTRALIA
Phone: 02 9638 4744
Fax: 02 9638 4822
Email: [email protected]
Website: http://www.rhinorack.com.au
Comment
-
Originally posted by Phs View PostHi guys
Any one got a photo of a 15xxx by 12xxx ?
Keen on one for our kaka, the mrs want to have the sunroof clear still not sure if it will[url=http://www.pradopoint.com.au/showthread.php?40535-Kurt-s-2013-150-Kakadu]Kurt's Rig Build[/url] - Black 2013 150 series Kakadu 3.0L D4D. TJM Low Loop nudge bar, Airtec snorkel, Rhino Pioneer SX platform, Sunseeker awning, Wynnum Towbar, Kaon half height cargo barrier, Roadsafe recovery points, Bridgestone D697s, Sandgrabba mats.
Comment
-
Hi, I hava JB roof tent, and looking into putting it onto the Pioneer Platform (2128mm x 1236mm) - #42107B, now the attachment rail on the JB tent are 64 cm apart. So I need to know what is the spacing of the North- South planks on the platform, and what is the space between them, if there is space to fit the tent to the East -West bars. The tent is 1.4m wide, so the attachment rail runs North South 32 cm east and west from the centre of the tent. So basically I need to know if there are no North South planks running at 32 east and west from the centre line of the vehicle.
Thanks
Comment
-
Originally posted by Borec View PostHi, I hava JB roof tent, and looking into putting it onto the Pioneer Platform (2128mm x 1236mm) - #42107B, now the attachment rail on the JB tent are 64 cm apart. So I need to know what is the spacing of the North- South planks on the platform, and what is the space between them, if there is space to fit the tent to the East -West bars. The tent is 1.4m wide, so the attachment rail runs North South 32 cm east and west from the centre of the tent. So basically I need to know if there are no North South planks running at 32 east and west from the centre line of the vehicle.
ThanksHere for a good time, not a long time!
2013 Toyota Prado GXL D4D Auto
Comment
-
Originally posted by Phs View PostHi guys
Any one got a photo of a 15xxx by 12xxx ?
Keen on one for our kaka, the mrs want to have the sunroof clear still not sure if it willOriginally posted by Kurt View PostI'm also looking at Pioneer Platform for the Kakadu - and tossing up between a 18xx long and a 15xx long due to the sunroof. Also considering between the SX (fits to the rails) and the normal (fits to legs / crossbars). I measured the roof for a 15xx by 12xx, and judging by where the SX would fit onto the rails it looks like the sunroof would be clear. No photos though as I haven't done it yet.
Comment
-
Bought Rhino Pioneer Platform (2128mm x 1426mm) - 42104B, because I wanted the largest possible, and also I could get it for $580 including postage (I was lucky)
I know this is oversized platform, and not specifically recommended for Prado 120, and was made aware that I will need to drill some holes here and there to make it fit, I was willing to do so in order to get more space as now and then I want to put my JB roof top tent three as well as other things.
I have also decided to ditch the factory roof rails and got the RLCP 03 legs for Prado 120
I had to drill an extra pair of holes for the rear cross bars, but that was OK.
I have also found out that I have been extremely lucky, and the JB tent just fits in by millimetres. If I would have bought the narrower platform the north-south planks would be in the way of the fitting rail, which also runs north-south.
Picture are here:
Borec' build
Comment
Comment