Prado 150 Bash plate sump guard

[Tin175 Senior Member Find all posts View Profile Close Tin175]

Item Name: Prado 150 bash plate sump guard
Item Description: Minecorp bash plate for 150 Prado. Listed for $180 but I got mine for $150. Really good design and well made. 3mm powder coated steel with folded up sides which makes it very stiff. Good vent holes and large drainage holes in back and corners of the trays. Designed so that all bolts are recessed so they won't be ground away. Fit perfectly with stock bumper or will fit up to an ARB bar. They are running out their Prado accessories so still have a few left.

Link: http://cgi.ebay.com.au/ws/eBayISAPI....m=161398651018

[Symo Advanced Member Find all posts View Profile Close Symo]

Prado 150 Bash plate sump guard

Bought one! $160

[Symo Advanced Member Find all posts View Profile Close Symo]

See!

[Tin175 Senior Member Find all posts View Profile Close Tin175]

I'm pretty happy with mine at the price I got it for. I was looking a other bash sump/guards and they were almost $400.

Well designed and well made.

Symo, did you get a tour of the workshop where they fit out all the mining vehicles? I was eyeing off all the tyres (coopers, BFGs) She said she could do me a good price but didn't think she had a set of 5 in the size I wanted. They had a couple of Milford cargo barriers going for a good price too.

[Symo Advanced Member Find all posts View Profile Close Symo]

I was too lazy and sent one of my minions to get it in their way past. We actually buy mine bars for our hilux's from them ironically. And yes for the price it's a steal (pin intended!).

Fitting it up this weekend. Glad I didn't pay $400.

[Symo Advanced Member Find all posts View Profile Close Symo]

Prado 150 Bash plate sump guard

Got any idea how to fit the plastic splash guard from the front bumper to the front lip of the plate? The original bolts and clips threaded into the old factory plate, the new plate just has three holes... nothing for the screws of clips to bite into. Is there meant to be another part?

Edit: came up with a solution just pulled the plastic out underneath and used 6mm lock nuts on the other side of the plate, and hammered the old plastic trim clip back in the centre. Holds nice and firm and factory look. Those plastic clips are damn strong!

[wanted Member Find all posts View Profile Close wanted]

[QUOTE=Symo;479555]Got any idea how to fit the plastic splash guard from the front bumper to the front lip of the plate? The original bolts and clips threaded into the old factory plate, the new plate just has three holes... nothing for the screws of clips to bite into. Is there meant to be another part?

Edit: came up with a solution just pulled the plastic out underneath and used 6mm lock nuts on the other side of the plate, and hammered the old plastic trim clip back in the centre. Holds nice and firm and factory look. Those plastic clips are damn strong!

Does anyone know if this product is available anymore. I cannot seem to find it on Minecorp website?