This weekend marked the time in my life when the rear seats of my GXL had to go. After much googling I found the instruction manual everyone else uses:
http://www.pradopoint.com/showthread...t-modification
I thought I'd put up a bit of a step-by step with photos to make life easier for others in the future. This will take a few posts as there's many photos and I can only have 5 per post.
Remove the tie down points. A 10mm socket gets the bolts out.
Lift out the fold up floor. This is held in with plastic clips that require a little force to remove.
With the fold up floor out, it is possible to lift out the left and right wing panels. These are also held in place with plastic clips, a gentle lever up gets them out pretty easily.
Left:
Left Panel Removed:
Right:
Right Panel Removed:
http://www.pradopoint.com/showthread...t-modification
I thought I'd put up a bit of a step-by step with photos to make life easier for others in the future. This will take a few posts as there's many photos and I can only have 5 per post.
Remove the tie down points. A 10mm socket gets the bolts out.
Lift out the fold up floor. This is held in with plastic clips that require a little force to remove.
With the fold up floor out, it is possible to lift out the left and right wing panels. These are also held in place with plastic clips, a gentle lever up gets them out pretty easily.
Left:
Left Panel Removed:
Right:
Right Panel Removed:
Comment