Announcement

Collapse
No announcement yet.

Removing third row seats step by step instructions (MY14 GXL)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    I'm still waiting on delivery of my rig. and this will be a job I'll be doing Nice post

    Comment


    • #17
      This is fantastic. I can tell you what my next project is going to be. It has bugged me for the last few camping trips having that stupid sloping floor, the extra height of the back floor and the fact that I'm lugging around 2 extra seats that add to the weight. Also I especially appreciate the pdf. I shall make use of your instructions!

      Comment


      • #18
        I've searched, but can't find if anyone has done this on a VX or Kakadu? Is it the same but with wires?
        2016 Crystal Pearl Auto VX 2.8, TJM Bar, Safari Snorkel, Cooper AT/3, OME 50mm lift, Dual batts

        Comment


        • #19
          Finally got the back drawer sorted thanks to the lads at Drifta. Opted for the optional table (best thing ever)

          https://goo.gl/photos/b7YVHCcanBkgNVuL6

          Got the Draw 200mm deep so i can fit my Billy in nice and snug

          Comment


          • #20
            Thank you for this information.
            I am about to pull my 150 seats out and this has taken out the guesswork

            Well Done !!!!!!!
            Prado 2014 Manual GXL, TJM T13 Bull Bar, Recovery Points, TJM Side Steps, TJM 9500 Winch, Airtec Snorkel, Lightforce 180SD LED Lights, TJM XGS Springs & Shocks 2" Lift, Toyo Open Country AT2, Hayman Towbar, Rhino Backbone and Platform, Tanami Drawers, Clearview drop slide, Engel 40L, Redarc Brake Controller, Hema Navigator, Kings Awning
            Off Road Camper Trailer ~ 2014 Toolman Explorer Hard Floor

            Comment


            • #21
              To confirm - the electric seats come out just as easily. 50kgs lighter and I'm sue I got an instant 1 inch lift!
              2016 Crystal Pearl Auto VX 2.8, TJM Bar, Safari Snorkel, Cooper AT/3, OME 50mm lift, Dual batts

              Comment


              • #22
                Great thread with top class instructions.

                This is a task I'll do before Christmas. Just wanted to ask if anybody had any dramas with installing the new false floor? Intend to use 5ply sheet about 1cm thick.

                Comment


                • #23
                  Originally posted by trsmith View Post
                  Finally got the back drawer sorted thanks to the lads at Drifta. Opted for the optional table (best thing ever)

                  https://goo.gl/photos/b7YVHCcanBkgNVuL6

                  Got the Draw 200mm deep so i can fit my Billy in nice and snug
                  I'm also interested in removing the seats and installing a false floor. I have looked at your pictures and was wondering why your floor does not right to the back of the 2nd row of seats?
                  2010 Prado 150 GXL Diesel, Cooper AT3, ARB compressor, Catch Can, Redarc BCDC 1225, Projecta DBC150, Optima YellowTop and RedTop D34, Pioneer Backbone Platform

                  Comment


                  • #24
                    DIY...





                    My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic

                    Comment


                    • #25
                      Damn good job mjrandom ! I'm almost to affraid to tackle because I know mine will not look as good !
                      2010 Prado 150 GXL Diesel, Cooper AT3, ARB compressor, Catch Can, Redarc BCDC 1225, Projecta DBC150, Optima YellowTop and RedTop D34, Pioneer Backbone Platform

                      Comment


                      • #26
                        It's not hard. Steps in my build (signature). Just take it slowly.
                        My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic

                        Comment


                        • #27
                          Originally posted by mjrandom View Post
                          It's not hard. Steps in my build (signature). Just take it slowly.
                          How do I get to the steps?

                          Comment


                          • #28
                            Ok, I didn't do the detail... in my signature there is My 150 and Rp then http:// click on that bit I'd that was the question. I was intending step by step but didn't do that though there are some progress pics.

                            Run a centreline down the floor and also a piece of ply. Draw a line at right angles in the floor and call that the datum. I used the inside where the floor drops down. The mark every 100mm and measure from the centreline to the edge. Mark these on the ply. I gave 5mm or 6mm clearance to give room for carpet and some wriggle room.

                            Some places you will need to go less than 100mm so suck it and see. Essentially make a grid on the floor and transfer that grid onto the ply.
                            My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic

                            Comment


                            • #29
                              Sorry for being thick but still looking for the steps..

                              "in my signature there is My 150 and Rp then http:// click on that bit"

                              How do we get there? Link?

                              ta

                              Max.

                              Comment


                              • #30
                                Originally posted by Puddock View Post
                                "in my signature there is My 150 and Rp then http:// click on that bit"

                                How do we get there? Link?

                                ta

                                Max.
                                http://www.pradopoint.com/showthread...-D4D-automatic
                                My 150 build - http://www.pradopoint.com/showthread.php?27423-A-Random-approach-to-a-Bluestorm-150-GXL-D4D-automatic

                                Comment

                                canli bahis siteleri bahis siteleri ecebet.net
                                mencisport.com
                                antalya escort
                                tsyd.org deneme bonusu veren siteler
                                deneme bonusu veren siteler
                                gaziantep escort
                                gaziantep escort
                                asyabahis maltcasino olabahis olabahis
                                erotik film izle Rus escort gaziantep rus escort
                                atasehir escort tuzla escort
                                sikis sex hatti
                                en iyi casino siteleri
                                deneme bonusu veren siteler
                                casibom
                                deneme bonusu veren siteler
                                deneme bonusu veren siteler
                                betticket istanbulbahis
                                Working...
                                X