Page 4 of 4 FirstFirst ... 234
Results 37 to 42 of 42
  1. #37
    Junior Member
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    81
    Deleted - duplicate post
    Last edited by steve.armitage; 27-09-2017 at 01:16 PM. Reason: duplicate

  2. #38
    Junior Member
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    81

    Rose has a snorkel.

    Yesterday, i got a Safari snorkel fitted by Opposite Lock in Balcatta. I was too chicken to do it myself.




    Driving home along the freeway, there was no apparent additional wind noise.

  3. #39
    Junior Member
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    81
    Fitted AMTS' compressor/fuel filter mount with an ARB high output compressor.
    Very nicely manufactured. Some of the steps were a little off, but easy enough to work out.
    The connector is easily accessible and easy to connect/disconnect.

    The mount just fitted along the cables i'd run from my dual battery system (in the grey conduit)


    The excess compressor cables tucked into the mount next to the relay.

  4. #40
    Senior Member
    Join Date
    Nov 2015
    Location
    Springfield, QLD
    Posts
    253
    Quote Originally Posted by steve.armitage View Post
    Fitted AMTS' compressor/fuel filter mount with an ARB high output compressor.
    Very nicely manufactured. Some of the steps were a little off, but easy enough to work out.
    The connector is easily accessible and easy to connect/disconnect.

    The mount just fitted along the cables i'd run from my dual battery system (in the grey conduit)


    The excess compressor cables tucked into the mount next to the relay.
    Just watch the temps having the compressor mounted under bonnet especially on the new 2.8l.
    I did have mine there but got hot that coulndt touch it after pumping 4 tyres 15psi in each.
    I moved mine to inside the cab above the left hand wheel arch fits perfectly and is in the a/c

  5. #41
    Junior Member
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    81
    Quote Originally Posted by Hally View Post
    Just watch the temps having the compressor mounted under bonnet especially on the new 2.8l.
    I did have mine there but got hot that coulndt touch it after pumping 4 tyres 15psi in each.
    I moved mine to inside the cab above the left hand wheel arch fits perfectly and is in the a/c
    Thanks Hally, I'll keep an eye on that.

    Sent from my SM-G950F using Tapatalk

  6. #42
    Junior Member
    Join Date
    Mar 2016
    Location
    Perth
    Posts
    81
    This morning i installed Tin's excellent 30l water tank (Link)

    Setup the tank. As per instructions, pay attention to the line that says the banjo connectors don't need to be torqued up, or you'll do as i did and break one!


    Void between fuel tank and towbar assembly


    Cable tied the breathers to the fuel tank mounts.


    Mounting plates fitted to the towbar assembly mounting bolts


    View of the fitted water tank from the r/h side


    Underside view of tap and mounting


    Close up of tap and also a view that the water tank fits flush with the towbar assembly


    The mod is only noticieable because of the hose connector from the rear

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •