KZJ95 Prado 1997 5 seater rear anchor points for child seats

[terrano4 Lurker Find all posts View Profile Close terrano4]

Hey out there, just brought a 1997 tx Prado and looking for the car seat anchor points for the kids. Have taken out the carpet in the rear tray and can see the cargo loops, there are also a couple of bungs that seem to be in the right position behind the seats but when removed are just plugging a 20mm approx diametre hole?? The cargo loops do not seem to be lined up with the centre of the seats in the back..... not sure whether to replace cargo loops with proper anchors or if the 20mm holes that are plugged are to be used somehow. Some advice would be appreciated. Cheers Mik

[oceanracer Moderated member Find all posts View Profile Close oceanracer]

Im pretty sure it does have them , ill look when im home as everything is removed from mine.

[terrano4 Lurker Find all posts View Profile Close terrano4]

Thanks mate. Appreciate it.

[oceanracer Moderated member Find all posts View Profile Close oceanracer]

Is this it

[terrano4 Lurker Find all posts View Profile Close terrano4]

Mine has nothing in it. Where was this mounted? Directly behind seats into a threaded hole a little bit offset to the centre of the seat? Or in a hole directly behind the seat?? Cheers M

[mrkrinkle Senior Member Find all posts View Profile Close mrkrinkle]

We bolted ours into the floor behind the middle row of seats. Fitting looked a bit like the above from oceanracer;.

[oceanracer Moderated member Find all posts View Profile Close oceanracer]

This is the liner that was in the back. Its upside down so it was on the Passengers sider looking at the dent