Dropped 40 litres of spare 150 octane race fuel left over from today's dyno session in Melbourne. Should give the old girl a nice clean out on the trip home tomorrow.
Announcement
Collapse
No announcement yet.
What did you do to your 120 today?
Collapse
X
-
Onboard Air with Thumper
Finally got around to finishing the onboard air install I started here: http://www.pradopoint.com.au/showthr...l=1#post557184
Cut the handle off the 4wdsuperstore Air Tank
Looking good now
Fits perfectly
Ran the line to the back, theres even factory clips to hold it!
All plumbed up
Regulator and moisture trap just fits
Air outlet on the bull bar
Final Touch!
Oh and I also adjusted the handbrake
Comment
-
Spent the day hunting gremlins out of the interior lighting system. Pulled out all the door switches and gave them a refurb the did the same to the interior roof lights. There was corrossion on all the copper terminals and red dust a plenty. Now she is all lit up and is working like the day it rolled off the lot.
Comment
-
Originally posted by Wtrxprs007 View Post
Did you change the thermostat at the same time? That was horrible!
Mine was leaking for a year so i started using water rather than coolant (Mistake) it was just a big rusty mess
Comment
-
Originally posted by Plums View PostGreat job ! - I did mine about a month ago (2004 1KZ-TE engine, automatic) - it looks quite different, mirror image almost. On mine the drain plug is on the passenger side and the transmission cooling on the drivers side of the radiator. Is yours the 1KD motor/D4D?
Did you change the thermostat at the same time? That was horrible!
Mine was leaking for a year so i started using water rather than coolant (Mistake) it was just a big rusty mess
[B]CANYONEROOOOO *whipping in the distance*
[URL="http://youtu.be/7ZeFDe44Ddo"]
http://youtu.be/7ZeFDe44Ddo[/URL]
Toyota LandCruiser Prado GXL V6 [COLOR=#800000]Red[/COLOR][/B] (APRIL 2006 BUILD)
Comment
-
Sent her in for brake and auto fluid flush and grease the drive shaft.
Cost me $170. Seemed too cheap. The auto fluid and labour along would of been more than that. I was expecting $3-400.
I do trust the mechanic though and he's a fellow Toyota petrol lover (he has an FJ).2007 GXL V6 - ARB Bullbar with LED lights, snorkel, extractors, 2 1/4" dual exhaust, K&N filter, dimpled/slotted rotors, headrest dvd players, Ebay Satnav/reverse camera, GME 3100TX, Tigerz11 Side awning on custom brackets with Maxtrax mounts, 300W Invertor, ARB Underbody protection, Lightbar and STZ 265/70 tyres.
Wish list in order I'll get them: Sliders, 2" lift, E-locker, Winch bar with winch.
Comment
-
TCT888.
they are awesome. was going to go with the kings brand but there was a few things swayed me,
1. these ones have 10watt crees x 37 piece (370 watt) , kings ones are 5watt x32piece (160 watt)
2. both sets of covers are included in price, kings covers are extra
3. 2 years warranty , kings is only 1 year
For $189 including cover, wiring harness and 2 year warranty it's a no brainer , Purchased these through ebay from seller - sunyee trading,
Lightbar is 3 years old and from same seller, i have purchased a heap of stuff through these guys over the years and service and after sales in excellent.
Have a look at some of the feedback on the spotties on ebay.
http://www.ebay.com.au/itm/Pair-9inc...w42dZDGZj#rwidFollow The Zuttas OZ ADVENTURE on FB...[url]https://www.facebook.com/pages/The-Zuttas-OZ-Adventure/439583419452033?ref=hl[/url]
Comment
-
Originally posted by Helmuut View Post
Hey, on Facebook me and the guys started a club last week for 4x4s in the south east region called "South East 4x4 Club (VIC)". Now has over 300 members and it's basically 80% prados lol. Some of us will be having a day out at bunyip on Sunday. If you want to tag along let me know![B]CANYONEROOOOO *whipping in the distance*
[URL="http://youtu.be/7ZeFDe44Ddo"]
http://youtu.be/7ZeFDe44Ddo[/URL]
Toyota LandCruiser Prado GXL V6 [COLOR=#800000]Red[/COLOR][/B] (APRIL 2006 BUILD)
Comment
-
She got some bling on the weekend, fitted the Lexus GX470 windows/door weather seals/mouldings before we start to get some bad weather. Here is the how to thread to help others because I struggled to find how to remove the rear trims: http://www.pradopoint.com.au/showthr...l=1#post570776
Also did the Auto Flush with pan off and new filter, plus pumped out the 12L using the radiator line method.
Installed the Stedi Fog / DRL lights into the ARB Bullbar too. Just need to wire them up. Great looking lights compared to the factory ARB ones.
[B][2007 GXL 120 3.0L D4[COLOR="#FF0000"]D[/COLOR] Auto][/B] [I]Mods:[/I] [COLOR="#DAA520"]Bilstein [/COLOR][COLOR="#0000FF"]Shocks [/COLOR]& [COLOR="#DAA520"]King [/COLOR]2" Lift Springs - 265/70/17 [COLOR="#3366ff"]Cooper [/COLOR]AT/3s Tyres - [COLOR="#FF0000"]ARB [/COLOR]Deluxe bullbar - LED Spotlights & Worklights - Snorkel - [COLOR="#008000"]BushSkinz [/COLOR]bash plates - 2.2m Alloy Overlander Full Rack - 2.5m [COLOR="#8B4513"]Wanderer [/COLOR]Awning - [COLOR="#FF0000"]GME [/COLOR]TX3120S UHF & [COLOR="#FF0000"]GME [/COLOR]AE4703 6.6dBi - [COLOR="#FF8C00"]Milford [/COLOR]Cargo Barrier - [COLOR="#FF0000"]JVC [/COLOR]indash DVD - [COLOR="#FF8C00"]Maxtrax [/COLOR]- Pulling a heavily modified [COLOR="#3366ff"]Jayco [/COLOR]Dove Pop Top Camper
Comment
Comment