ARB Deluxe IPF foglight upgrade

[MrBurns Lurker Find all posts View Profile Close MrBurns]

Hey guys

I wanted to upgrade my foglights to the stedi led with drl, but I have the old style ipf foglights and surrounds which apparently aren't applicable to this upgrade.

Now I've heard that some people have been able to fit the new style surrounds that are slightly smaller than the originals. Which would then allow the stedi fogs to be used.

Hoping someone might be able to point me in the direction of how to carry this out, can't find any write ups on here about it.

Cheers

[Piggy Water pistol pilot. Find all posts View Profile Close Piggy]

The cut-outs in the bar are of different sizes and shapes. The Older IPF fogs will be the old-style V1 Bar. There is quite a difference, one I saw done with the V2 surrounds had issues with them falling out on corrugations.

[MrBurns Lurker Find all posts View Profile Close MrBurns]

Thanks, I decided to measure them as I found someone who has the newer style, considerably smaller in length there's no way they'd fit without issues, guess I'll just have to suss out how it mounts and what not see if I can do anything with it, or just chuck led globes in the ipf if they fit.

[Piggy Water pistol pilot. Find all posts View Profile Close Piggy]

Thanks, I decided to measure them as I found someone who has the newer style, considerably smaller in length there's no way they'd fit without issues, guess I'll just have to suss out how it mounts and what not see if I can do anything with it, or just chuck led globes in the ipf if they fit.

There was a mob doing fibreglass reproductions for the ARB bars, not sure if they do both types, but they fitted a different fog from memory, you'd have to search this forum, one of the guys did a write-up on it.