Number plate light

[LowRange Member Find all posts View Profile Close LowRange]

I've had the rear number plate light go, and the bulbs are fine there's no voltage at the globe sockets. I believe the fuse for this is the under dash fuse box, third row and third fuse down labeled TAIL however this fuse is fine. I also pulled and checked all other fuses and they all checked out good, and all other lights such as reverse, tail lights, blinkers etc work.

Before i go tearing it to pieces, anyone else had this issue or got any tips where the problem is likely to be?

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

If you’ve got power at the fuse and no power at te globes then unfortunately it will e a suck and see exercise, I’ve had similar before and turned out it was the wires near the tow ball area had been hit by a rock etc, there should be a connector under there that’s where I’d start first.

[LowRange Member Find all posts View Profile Close LowRange]

Thanks mate much appreciated, it gave me somewhere to look before tearing panels off. Unfortunately under the car all checked out, i ended up finding the issue inside the rear door. There's a connector in there that had come apart, so if anyone encounters a similar issue it was the gray one in the pic. The connector clips in to the oval hole in the door skin.

[GX-D4D Banned Find all posts View Profile Close GX-D4D]

Glad you worked it out mate, good to know for next time.