bolt on exhaust for v6

[dalefrench Lurker Find all posts View Profile Close dalefrench]

does anyone know if there is some where that does this ?

[oceanracer Moderated member Find all posts View Profile Close oceanracer]

Try these links ,
http://www.pacemaker.com.au/index.ph...ategory_id=131


http://www.pacemaker.com.au/index.ph...category_id=29

[awwricecracker Member Find all posts View Profile Close awwricecracker]

Beaudesert exhaust, I recommend them for their product and service. They do use pacemaker headers and the rest of the system is well engineered. It was worth it for me to ship their system all the way over to the Kimberleys.

[sunny120 Junior Member Find all posts View Profile Close sunny120]

Anyone know a price?

[oceanracer Moderated member Find all posts View Profile Close oceanracer]

I think for my 90 it was about 1k for it all,

[cfryback Find all posts View Profile Close cfryback]

The only "problem" is I cannot easily find high flow cats.

I'd like the headers/extractors onto high flow cats.

[sunny120 Junior Member Find all posts View Profile Close sunny120]

After a bit of an accident on the OTT with the rear exhaust section, I've put the cat back Pacemaker system on. Can feel quite a bit of a power difference especially on take off, feels like I'm taking off on my road tyres with my muddies on if you get what I mean. Not too noisy whilst cruising along freeway speed but a definite noticeable growl at start up and when putting the right foot down. Will look into getting the Y section at a later stage to get rid of the 2 knock boxes after the cat. Will be interested to see how the fuel economy stacks up after a while.

[teztinkv6Prado Member Find all posts View Profile Close teztinkv6Prado]

Did you put on the King Brown system. I fitted this to mine and power, economy has increased with a nice but unintrusive note.
with the pacemaker extractors, you won't go wrong

I'm happy ��

Cheers
Terry

[kevdebbi Senior Member Find all posts View Profile Close kevdebbi]

Did you put on the King Brown system. I fitted this to mine and power, economy has increased with a nice but unintrusive note.
with the pacemaker extractors, you won't go wrong

I'm happy ��

Cheers
Terry

Hi Terry,

do you have a price for the King Brown system? I have already have the extractors and am thinking about upgrading the rest.

Thanks

[teztinkv6Prado Member Find all posts View Profile Close teztinkv6Prado]

Kevdebbi

I recall paying about $900 fitted, extractors cost from memory about $800 fitted... I have yet to change the Y piece ( doing exhaust in stages) which I suspect will improve it more...not cheap but was worth it in my opinion....

I did the whole 2.5" mandrel bent generic but the noise was tug boat like and it droned badly, terrible. Once the muffler let go, I changed it out and haven't looked back.

Cheers