Mono Flap?

[HGMonaro Advanced Member Find all posts View Profile Close HGMonaro]

Once upon a time, Slades had some piccies up of his mono flap, unfortunately (for me) they're gone. I was under the impression that there was some bolts holes in the chassis rails that one could afix a mono flap to easier. Poked me head under the other day and there's quite a few holes, but none (that I could see) go right thru the chassis rails ready for a bolt to be poked thru. I'm not about to start drilling some extra holes but there seemed to be some threaded holes (captive nuts?). Anyone got any idea what they are there for?

[Addy Senior Member Find all posts View Profile Close Addy]

I remember asking slads how he did it. He used the bolts already there from the tie down hook at the back. Take that out when you want to use the mono flap.
There is holes on the other side in the same place. Use one bolt per side as there is two from the tie down.
Hope that helps, he made up a angle plate bracket with holes in it each end that bolts into the holes where the tie down came from. The rubber flap is cut to size and attached to the bracket.

[HGMonaro Advanced Member Find all posts View Profile Close HGMonaro]

cool, I looked at those but I didn't think about removing the existing tie-down!