TJM T3 Explorer Bullbar fitted today. Very happy with the result.
Announcement
Collapse
No announcement yet.
150 facelift MY14 bullbar picture gallery
Collapse
This is a sticky topic.
X
X
-
Nice Rig Bobcrusader! Yeah I'm getting the recovery points installed at the same time. I had already bought some Road Safe recovery points so TJM are fitting them for me at the same time as the bar for a small price adder. Thanks for the heads up anyway.
Leave a comment:
-
-
So I bit the bullet and ordered the TJM T3 bullbar, colour coded to my Crystal Pearl VX. It gets fitted in 2 weeks. Will post some pics when it's complete. $2396 incl. painting and fitting.
Leave a comment:
-
Originally posted by 2016VX View PostNoctuid,
Nice bar. I am also looking to get the TJM T3 bar for my white 2016 VX. Initially I was determined to colour it to the Crystal Pearl, however looking at the black bar on your Kakadu, I might consider the black. It looks good against the white. If you don't mind me asking, what did you pay for the bar + recovery points? Also, have you had any issues with the front parking sensors being after relocation to the bullbar?
Cheers,
2016VX
Yeah im happy with the stock black on the crystal pearl.
The T3 bar plus recovery points was $2400 fitted from TJM Hendra.
I had also read that people have had issues with the parking sensors when brought forward into the bar, but I have had no such issues. Youll notice the sensors kind of stand out as crystal white circles against the black steel, but that looks ok also. Collision detection stuff is all unaffected also, and headlight washers arent touched with the install of the T3.
Very happy with it so far.
Cheers
Leave a comment:
-
Originally posted by Noctuid View PostFirst post! TJM T3 plus recovery points on 2016 Kakadu. Very happy with the job by the team at TJM Hendra
https://imgur.com/gallery/zvlfC
Nice bar. I am also looking to get the TJM T3 bar for my white 2016 VX. Initially I was determined to colour it to the Crystal Pearl, however looking at the black bar on your Kakadu, I might consider the black. It looks good against the white. If you don't mind me asking, what did you pay for the bar + recovery points? Also, have you had any issues with the front parking sensors being after relocation to the bullbar?
Cheers,
2016VX
Leave a comment:
-
Thanks very much Phs.
Appreciate the quick follow up.
Ben
Originally posted by Phs View PostHi Ben,
1. Parking sensors are in bar work like for like with factory setup
2. Never discussed camera relocation, but it can be done not sure if OL will do it, still works you just loose the bottom half visibility due to bar.
3. Bar fits well and i am happy.
4. Hard to say with just a bar, by that stage we had bar, winch, duel batts ect. Still no need for new suspension unless your wanting to gain clearance.
Leave a comment:
-
Hi Ben,
1. Parking sensors are in bar work like for like with factory setup
2. Never discussed camera relocation, but it can be done not sure if OL will do it, still works you just loose the bottom half visibility due to bar.
3. Bar fits well and i am happy.
4. Hard to say with just a bar, by that stage we had bar, winch, duel batts ect. Still no need for new suspension unless your wanting to gain clearance.
Leave a comment:
-
Hello Phs,
I am loving the look of this OL bar for the facelift model. I too have the Kakadu model.
I have a couple of questions if I may
1. Are there parking sensors in this bar?
2. It looks like the front camera hasn't been moved, was that by choice? does it still work ok where it is?
3. Are you happy with the overall fit of this bar?
4. Is there any need to upgrade the suspension to allow for the weight of the bar (hoping to keep standard suspension)
thanks in advance
Ben
Leave a comment:
-
First post! TJM T3 plus recovery points on 2016 Kakadu. Very happy with the job by the team at TJM Hendra
https://imgur.com/gallery/zvlfC
Leave a comment:
-
I went the TJM bar at the time, but only cos ARB couldn't give a release date for the Sahara bar
Leave a comment:
-
Funny that,
Prior to buying a Prado I thought the face lift models looked NQR but loved the done up ones with ARB bars but the factory tear drop head lights grew on me a lot to the point I didn't want to change the look for a bull bar that simply doesn't fit the profile ( ARB )
And could not be happier with the OL bar, saw a TJM bar also like them very similar to the OL But it is all personal preference
Also don't think the NON led DRL are any chop either so if I had them also would not be to bothered
Last edited by Phs; 26-02-2017, 07:28 PM.
Leave a comment:
-
Yeah I'm with you. I've got an ARB deluxe winch Bar and I know it cuts off the bottom of the DRL but for me that's better than a bar that looks like Dame Edna
Leave a comment:
-
i still cant come at the upswept hoops over the lights - looks like a pair of dame edna glases to me
Leave a comment:
Leave a comment: