I am trying to locate the correct hose to T into for installation of a boost gauge on a 2010 gx 150 Prado 3.0. can someone show me the correct way on this engine?
Announcement
Collapse
No announcement yet.
Boost gauge install help
Collapse
X
-
Chasing this info as well as I'm about to fit one. I might drop into my mechanic this week and get his advice. I'm pretty sure I know which line it is but not sure enough to post it here haha<Rob> '12 Prado GX - https://www.pradopoint.com.au/forum/general/my-rig-build-up/32702-i-m-back-with-a-2012-150-gx-toorak-tractor
Comment
-
Yeah I decided to do the same thing this morning(mechanic fit). I will post a pic once it's done. I thought this would be much simpler or there would be plenty of info on this.Last edited by Haydlew; 13-06-2018, 08:26 AM.
Comment
-
Perfect, thanks for that!
That was where I was pretty sure it'd be but now I know for certain, I'll do my install over the weekend. Gauges look good! I've installed my pillar pod too but have 2x dual gauges to go in, so I'll have EGT, Boost, Oil Pressure and Water Temp<Rob> '12 Prado GX - https://www.pradopoint.com.au/forum/general/my-rig-build-up/32702-i-m-back-with-a-2012-150-gx-toorak-tractor
- 1 like
Comment
-
Originally posted by BenC_150 View Post
That looks really tidy. Can I ask, does the pod pillar replace the entire panel on the A-Pillar?
Works with the airbags - the airbag pops the a-pillar trim off when it goes off so the pod just goes with it.<Rob> '12 Prado GX - https://www.pradopoint.com.au/forum/general/my-rig-build-up/32702-i-m-back-with-a-2012-150-gx-toorak-tractor
Comment
Comment