Good 12V Ignition / Constant source in dash area?

[Snouto Member Find all posts View Profile Close Snouto]

Thanks

Bugga

Lurker

Find all posts

View Profile

Close

Bugga that’s a useful link - presumably the fuses will be the same but I’ll check one of mine to be sure.

[alvingo Lurker Find all posts View Profile Close alvingo]

Hi Snouto,

Just bumping this thread as I do need to connect my dashcam into this fuse box via fuse taps wires as well.

I just confirmed that it is a 'Low Profile mini Fuse'

Do you happen to pinpoint which is constantly ON (BATT) and where should the ACC wire should go for the dashcam?

You help guys is much appreciated.

[GeeWhizz Senior Member Find all posts View Profile Close GeeWhizz]

BAT (No break 12v power) is available on the "OBD" fuse, 7.5 Amps and can be tapped in the inside fuse panel top end of the centre row of fuses.

In normal circumstances, it would only be used when an OBD dongle is plugged into the DLC connector, under the steering wheel / above the footwell area.

[alvingo Lurker Find all posts View Profile Close alvingo]

Just want to share when I installed my VIOFO dash camera while using its HK3 hardware kit.
I've plugged my ACC to 15A P/OUTLET and my BATT to 30A P/SEAT FR
This is the orientation of my fuse wire tap.

[jdh573 Lurker Find all posts View Profile Close jdh573]

Can add to that - the blanks marked with circles at the "live" terminal are BATT options as well. No other blank is live as BATT or ACC