Stedi arb fog light install ?150 series

[JSnelgar Lurker Find all posts View Profile Close JSnelgar]

Hey has anyone installed the Stedi arb fog lights ? For Toyota prado 150 series

im a little confused as to where they hook into

thanks

[08D4DPRADO Lurker Find all posts View Profile Close 08D4DPRADO]

I installed a set into my ARB bar on the 120, so I assume they are similar. Mine came with a double ended plug for install directly into the rear of one of the headlights. The previous headlight plug adjoins the rear of the Stedi plug. Along with a switch line and a power line via the fuse/relay, it all works when high beam is on. I have not bothered with the 'Daytime running light' function currently though.

[JSnelgar Lurker Find all posts View Profile Close JSnelgar]

Ok then yeh mine doesn’t come with a plug just three wires

[Mattys150 Lurker Find all posts View Profile Close Mattys150]

From memory, i cut the plug off and soldered those 2 wires to the new fog light, which leaves a spare wire from the fog light. Then i wired this into the fuse box into 12v ignition so the DRL is illuminated when the car is running. Can't remember the colour wires unfortunately.

[Corigator Avid PP Poster! Find all posts View Profile Close Corigator]

On my 120 I found a plug on the drivers side near the fog light, which is on with the ignition. I just plugged the DRLs into that.