Aftermarket Replacement Headlights 150 Series

[rjg1973 Junior Member Find all posts View Profile Close rjg1973]

Hi all,

I’ve refurbished my cloudy headlights a couple of times with diminishing reward for effort, so I’m thinking of replacing them instead.

Anyone had any experience with these for about 1/4 the cost of OEM items?

https://www.ebay.com.au/itm/Set-Pair....m46890.l49292

I have a 2011 GXL with electronic headlight height adjustment from a cabin switch. They say they replace the Halogen units only, not Xenon. Are there any early 150s with Xenon?

Any thoughts welcome.

Cheers,
Rob

[Boneyone Member Find all posts View Profile Close Boneyone]

Mine's a 2010 GXL D4D & uses the H11/HB3 globes. When you say cloudy do you mean the low beam lense is cloudy? Now that I look at mine I realize that they are indeed very cloudy.

[rjg1973 Junior Member Find all posts View Profile Close rjg1973]

No, it’s the whole outer/external plastic lens. You can refurb it with polish and very fine grit sanding but it seems that it’s getting cloudy again after less and less time.

[Boneyone Member Find all posts View Profile Close Boneyone]

The plastic headlight protectors work a treat with preventing that.

[COLBJJ Lurker Find all posts View Profile Close COLBJJ]

I have the same issue on my 120, sanded & buffed them with a kit only to end up cloudy after a period of time. Slightly less than when I started but cloudy again.
what are the reliable suppliers to replace the whole headlight units?
So many aftermarket units for sale.

[Piggy Water pistol pilot. Find all posts View Profile Close Piggy]

You need to coat them with a UV resistant clear coat once buffed, or they will cloud over again in a couple months.