Just bought a kit off Zordo for my Prado 150 on the weekend. So great to hear the good reviews. He really knows his stuff. A shop in Sydney gave me a quote for the same setup and recommended the wrong Bilstein shocks for the 2" lift.
Very lucky that I found this forum and found Zordo before I went and bought the wrong gear. You would think a suspension shop would know what they are selling, but most of them don't have a clue.
+1 for Zordo
-
I'll add a big thanks to John (Zordo) as well. Bought the suspension a few weeks ago from John and he was very helpful with advice. Installed them today with the help of a mechanic (friend) and John was happy to answer a couple of questions on a Sunday! Suspension (Dobinsons/Bilstein) is riding really nicely.Leave a comment:
-
I drove 2.5hrs to go to him and including my fuel costs to & from, he was still cheaper than anyone local to me. I wouldn’t go anywhere else for suspension again. He gives great advice, talks you through what he’s doing while he does it and you get to watch him do the work while you wait, and throw the ball for his playful dog too. Very good setup he’s got going on. If I wound the clock back 20yrs I’d get extensive experience as a suspension fitter too and then offer the same service he does. It’d be a great gig.Leave a comment:
-
Shout out to Zordo's
Just finished fitting a full 2" dobinsons monotube lift kit I purchased from John (Zordo) a few months back. Life got in the way and fitting got delayed unfortunately.
I had him assemble the front struts and explained that I would be fitting a bulbar/winch down the track etc. He set the struts up and they are absolutely perfect. It all is yet to settle but I gave it a run over some rough corregated dirt roads near home etc to get first impressions, I can honestly say I am stoked. I was concerned the ride may be a little rough as I chose the highest load rated springs (C59-327 and C59-352) all round, but no it is perfect, and best of all it has finally lost that standard suspension boat feel.
Front heights are both 807mm and rear are both 855mm. so ith a little settle the fronts should sit around 800 and 850 rear. I had purchased airbags aswell but for the time being have left them out and will fit them at a later date if I feel they are needed.
If you are looking at upgrading your suspension I could honestly recommend Zordo, great communication and super easy to deal with 10 out of 10.
Leave a comment: