Announcement

Collapse
No announcement yet.

Seat belt replacement

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Seat belt replacement

    Hi all out there hope i am posting this in the right place,
    We have a 97 toyota prado grande, i have been trying to find out the following.
    1. What size seat belt fitting is it so as i can get seat belt extenders to fit (kids moving up to booster seats)
    2. a couple seat belts are not retracting fully so have been trying to source new ones and all so how to change them over.
    Toyota them self couldn't tell me if they were gas charged, attached to air bags or just straight forward to change over? And no they dont appear to be able to do them iether!

    Can anyone help me with 1. where can i purchase after market seat belts for this model ($700 for genuine toyota frond, and $44o for each back is just rude!
    2. Instructions or somewhere to find instructions on actaully how to change them safely or if they even can be changed (other 1/2 is very good at this sort of stuff) but wasnt sure if he was going to trigger air bags of or what and unfortunatly we have been asking around here and no one seems to have clear answer's any help or advice would be appreciated.

  • #2
    The 3rd row rear ones in my 97 were just normal inertia type ones, got a replacement from a Toyota wreaker in Brisbane for 145 bucks if I remember correctly. Sorry I ‘m not exactly sure of the name, got the number from the yellow pages in the wreakers section.
    Might have been this mob.
    http://salisburywrecking.rtrk.com.au..._id=5130729822
    Also try
    http://www.totalpartsplus.com.au/Sea...ts-pg9330.html
    Both in Brisbane.
    Could try
    http://www.usedtoyotaparts.com.au/?g...FYQhpQod738A0w
    in Melbourne.

    Hope that helps.
    Cheers
    Ken

    Comment


    • #3
      Not sure where you are, but try this mob http://seatbeltsolutions.com.au/, they ship to the eastern states. $125 to reweb an inertia belt. Just have to be careful removing them, cause I think they have a small charge in the pretensioner.

      Comment


      • #4
        If you are worried about air bags etc, disconnect the battery and wait 10 minutes or so., this lets the capacitors drain down.
        Not sure about any charges in the pre tensioner, but you could ask Mr T or the mob from the link Rainman supplied.

        Comment


        • #5
          Originally posted by Rainman View Post
          Just have to be careful removing them, cause I think they have a small charge in the pretensioner.
          I think from memory you have to insert a pin in a hole. Full details are in the gregorys manual. You should be able to borrow one from the local library. Ken.
          Ken
          3.4 GXL man 1997 petrol / gas, BFG mud tyres 265 75 16, front and rear camera, Jaycar 6300Lm LED 6.5" D/L * 2, 15W LED reversing/work light, diff breathers, 42mm lift, Rear Anderson plug, Dash cam, and way too much recovery gear for one vehicle to carry around. No more HID headlamps. No more Narva D/L.

          Comment


          • #6
            Car Removals the mostly hired Company and the provider for Best Car Removal Services Brisbane in Australia. They have a team of professionals who know how to handle the vehicles with care. They offer free towing service at customer premise only. Contact or mail at - [email protected], today to get more info about related services.

            Comment


            • #7
              Get ready to sell old vehicles parts because now Car Wreckers is here to buy Auto Parts Brisbane at a reasonable price. We are the right choice for your car as we have the expert team that care precious cars with extra care. Contact us today to avail the best Car wreckers services.

              Comment


              • #8
                Got Quoted $600 from the dealer last week to supply the driver's seatbelt.
                There is cheaper ones on ebay but the colours are wrong.

                Comment


                • #9
                  What I did last week was to remove a passenger side seat belt completely and wash (i used dilute dishwasher solution in an ultrasonic cleaner) and rinse thoroughly several times and allow to dry completely. You have to insert a wire coat hanger in the slot where the belt is secured or you will loose the number of turns the reel has and possibly discharge the reel. DON'T JUST LET IT GO. When you assemble the drivers side reel you would have had the experience from the previous disassembly. The belt is held in by a piece of plastic that is held in the loop in the end of the belt.It is easily removed by carefully inserting a small screwdriver between the belt and the plastic piece and then lifting so the plastic can be slid out. Assembly is just the reverse of disassembly. If you need further details with any aspect just message. Ken.
                  Ken
                  3.4 GXL man 1997 petrol / gas, BFG mud tyres 265 75 16, front and rear camera, Jaycar 6300Lm LED 6.5" D/L * 2, 15W LED reversing/work light, diff breathers, 42mm lift, Rear Anderson plug, Dash cam, and way too much recovery gear for one vehicle to carry around. No more HID headlamps. No more Narva D/L.

                  Comment

                  canli bahis siteleri bahis siteleri ecebet.net
                  mencisport.com
                  antalya escort
                  tsyd.org deneme bonusu veren siteler
                  deneme bonusu veren siteler
                  gaziantep escort
                  gaziantep escort
                  asyabahis maltcasino olabahis olabahis
                  erotik film izle Rus escort gaziantep rus escort
                  atasehir escort tuzla escort
                  sikis sex hatti
                  en iyi casino siteleri
                  deneme bonusu veren siteler
                  casibom
                  deneme bonusu veren siteler
                  deneme bonusu veren siteler
                  betticket istanbulbahis
                  Working...
                  X