DAB can be enabled for some units under service setting menus. E.G Australia 16CY AVN
The unit must have navigation function/antenna (white) and dab antenna plug(black) available.
This can be changed from service menu. and requires Dab antenna from Toyota or make own DAB antenna(costed me AUD$12 from saw&dust methods) ^^
PZQ60-00500 DAB Antenna Kits.
Function Check/Settings
Next Page (contains Panel&Steering Switch, Vehicle Signal so on)
Other Settings
If DAB menu is not available and have dab antenna slots, it means either disabled by firmware or DAB Tuner chip-set/Rom is missing.
1. It requires firmware updates with dab function enabled/added/or
2. If DAB executable file exists .e.g _DAB_IO/DAB_CTL so on and DAB access menu is not available and disabled by firmware ,
home/naviwork/usrconf/ change config file to 1 from 0.
################################################## ##############################
# parameter for LLD_DAB
######################################## ########## ##############################
DABDRV_ENABLE 1 #DABドライバの起動/終了の許可/禁止の設定。
DABDRV_INTR_NUM 382 244 245 #CS#ポート割込み番号 受信DMAC割込み番号
DABDRV_RCV_DMACH 30 #受信用DMAチャンネル番号
DABDRV_SND_DMACH 31 #送信DMAチャンネル番号
DABDRV_RCV_RBUF 4 #受信リングバッファ段数
DABDRV_CSI_INF 5 0x00000002 0x00000003 #CSIチャンネル番号、CSIチャンネル受信及び送信DMASEL番号の設定。
DABDRV_DRVSET_INF 95 94 #CS#ポート番号、INT#ポート番号の設定。
DABDRV_SET_INF 95 1000
DAB_PROVIDER 1 #DABのマイコンメーカー(PIO社製=1, PAS社製=2)
3. If chip-sets are missing, external box (hardware) connection is required
also some mirrorlinks related files were available in kernel, did not bother to study as it is v1.0 or v1.1 useless.
The unit must have navigation function/antenna (white) and dab antenna plug(black) available.
This can be changed from service menu. and requires Dab antenna from Toyota or make own DAB antenna(costed me AUD$12 from saw&dust methods) ^^
PZQ60-00500 DAB Antenna Kits.
Function Check/Settings
Next Page (contains Panel&Steering Switch, Vehicle Signal so on)
Other Settings
If DAB menu is not available and have dab antenna slots, it means either disabled by firmware or DAB Tuner chip-set/Rom is missing.
1. It requires firmware updates with dab function enabled/added/or
2. If DAB executable file exists .e.g _DAB_IO/DAB_CTL so on and DAB access menu is not available and disabled by firmware ,
home/naviwork/usrconf/ change config file to 1 from 0.
################################################## ##############################
# parameter for LLD_DAB
######################################## ########## ##############################
DABDRV_ENABLE 1 #DABドライバの起動/終了の許可/禁止の設定。
DABDRV_INTR_NUM 382 244 245 #CS#ポート割込み番号 受信DMAC割込み番号
DABDRV_RCV_DMACH 30 #受信用DMAチャンネル番号
DABDRV_SND_DMACH 31 #送信DMAチャンネル番号
DABDRV_RCV_RBUF 4 #受信リングバッファ段数
DABDRV_CSI_INF 5 0x00000002 0x00000003 #CSIチャンネル番号、CSIチャンネル受信及び送信DMASEL番号の設定。
DABDRV_DRVSET_INF 95 94 #CS#ポート番号、INT#ポート番号の設定。
DABDRV_SET_INF 95 1000
DAB_PROVIDER 1 #DABのマイコンメーカー(PIO社製=1, PAS社製=2)
3. If chip-sets are missing, external box (hardware) connection is required
also some mirrorlinks related files were available in kernel, did not bother to study as it is v1.0 or v1.1 useless.