Rig Build 120 D4D Grande - 'MLC'

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

EGT:

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Here are some pics of the switch for the IPF's. Pretty easy to wire up, just need to source some dash light power. They bottom light will show when the dash lights are on, and the bunny symbols light up when the IPF's are turned on. Note, this requires the high beam on and switch on as they are wired to only go on with the high beam, bu unless the switch is on, they don't light up, makes sense I guess.

[Chip It Senior Member Find all posts View Profile Close Chip It]

Rob you post really well. Thanks for the write up and thanks for great pics of the install.

Very cool

Cheers

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Rob you post really well. Thanks for the write up and thanks for great pics of the install.

Very cool

Cheers

The EGT is great. The last question is easy to answer, the discount forum says I receive NO benefits other than those I disclose



Late edit: Justin aint no actor in the latest 4wd Action video ;p. Then again neither is the interviewer.

[MUMSRIG Avid PP Poster! Find all posts View Profile Close MUMSRIG]

Cool write up Rob.... Good to see someone else utilising the full stainless MANTA system that MUMSRIG donated herself for the R&D on. It is a nice system... Not loud or droney and looks nice and blingy... I'm glad that MANTA have included the EGT port as a standard option. I didn't think they would as when I requested it during the R&D I got the impretion that they thought there wouldn't but much demand for it.

We are looking into the Chip-It chip at the moment, so the old D-Tronic might be getting put in the bin!! It only gave an extra 7KW @ the wheels when we had it dyno'd the other week.

Mitch

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Cool write up Rob.... Good to see someone else utilising the full stainless MANTA system that MUMSRIG donated herself for the R&D on. It is a nice system... Not loud or droney and looks nice and blingy... I'm glad that MANTA have included the EGT port as a standard option. I didn't think they would as when I requested it during the R&D I got the impretion that they thought there wouldn't but much demand for it.

We are looking into the Chip-It chip at the moment, so the old D-Tronic might be getting put in the bin!! It only gave an extra 7KW @ the wheels when we had it dyno'd the other week.

Mitch

Mitch

10% discount if ordered through the forum see: http://www.pradopoint.com/showthread...n-CHIP-IT-Chip

[Trekrider Banned Find all posts View Profile Close Trekrider]

Hey Rob, Where did you get the 'Bunny Burner' switch?

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Hey Rob, Where did you get the 'Bunny Burner' switch?

http://www.customrockers.com.au/epages/cucu3398.sf

$25 each plus postage. They do on/off which is what i got, or ON-off-on, or momentary as well as others. I like them because they match the ARB switches and can be wired up to the dash lights for night driving.

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Tried the new EGT towing the camper trailer on Sunday. Went up the Princes Highway Hill heading out of Adelaide. Motors get hot!

[Trekrider Banned Find all posts View Profile Close Trekrider]

http://www.customrockers.com.au/epages/cucu3398.sf

$25 each plus postage. They do on/off which is what i got, or ON-off-on, or momentary as well as others. I like them because they match the ARB switches and can be wired up to the dash lights for night driving.

Magic, thanks Rob.

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Noticed some additional war wounds fro Bendleby. I knew the "incline" that required lockers was steep!

[nubs Junior Member Find all posts View Profile Close nubs]

have you figured out where youll put the winch solenoid? Ive just ordered enough cable to relocate mine to just above the ABS unit.

[MidLifeCrisis Out of control poster! Find all posts View Profile Close MidLifeCrisis]

Yep. Up near the driver. To the left of those diff breathers. The cable is bought and the job ready to do. Also got the remote unit to rig up.

[nubs Junior Member Find all posts View Profile Close nubs]

Nice. Ive got my winch power switch and winch in/out switch for mine now. (also got a bunny burner switch!) Im gonna put them just on the LH side of the steering wheel. im just waiting on the cable to arrive..

[alternative Senior Member Find all posts View Profile Close alternative]

Noticed some additional war wounds fro Bendleby. I knew the "incline" that required lockers was steep!

Shushhhh...... we completed EVERY track there with a bog standard terracan in the party and zero damage.

But i like the wound