Gurillas 2018 GXL

['Dan']

Awesome!

[Gurilla]

Very flash.

Having had a basket on my last 4wd, I had no intention of adding one to this car and haven't missed it.

What are you doing with yours? Rooftop tent or just storage space?

Will be for storage and solar

car won’t fit in the garage with the lift so might as well run solar and keep the battery’s in top condition as I use my Hyundai gets for work and prado sits there most days..

solar, maxtrax, awning and space for swag or whatver when I head off bush

['Dan']

Very flash.

Having had a basket on my last 4wd, I had no intention of adding one to this car and haven't missed it.

What are you doing with yours? Rooftop tent or just storage space?

[Gurilla]

Just ordered a rhino platform with backbone, should get in within 2 weeks from auto one

got 20% off

[Gurilla]

I have a VX but the sensor is for the LED headlights self levelling I believe as I can’t think of anything else that would require a height sensor.
It is mounted just in front of the diff on the drivers side and connects between the body and the trailing arm from memory, pretty obvious when you slide underneath. I just bent the bracket holding the loom so it took the tension off. I adjusted the length of the link but you might not need too although if you don’t the system will think your rear end is higher than the front, alternatively you can adjust the headlight to compensate.

Cheers I’ll keep that in mind when I lift mine and see what I can do

[Leethal]

I have a VX but the sensor is for the LED headlights self levelling I believe as I can’t think of anything else that would require a height sensor.
It is mounted just in front of the diff on the drivers side and connects between the body and the trailing arm from memory, pretty obvious when you slide underneath. I just bent the bracket holding the loom so it took the tension off. I adjusted the length of the link but you might not need too although if you don’t the system will think your rear end is higher than the front, alternatively you can adjust the headlight to compensate.

[Gurilla]

I run Billies and Dobinson’s from Zordo and am very happy with them. Fitting is not too hard just fiddly, don’t forget to adjust the rear height sensor wiring and position as mine was quite tight after the lift.

Cheers mate, does mine have that ? Mines a gxl only it’s the first I’ve herd of it

[Leethal]

I run Billies and Dobinson’s from Zordo and am very happy with them. Fitting is not too hard just fiddly, don’t forget to adjust the rear height sensor wiring and position as mine was quite tight after the lift.

['Dan']

Big raft of changes coming!

Exciting times ahead

[Gurilla]

Cars booked at tjm, few week wait they all booked out can’t get in until 17 September

bullbar , side steps, brush bars, 9500 winch,Spotties, snorkel and new uhf antenna to be installed


and also just ordered my lift off zordo I went with bilstiens and dobinsons kit

been along wait paying off stuff slowly but will look like a decent mall crawler soon !

also waiting for kaon to restock the underbody protection will be getting that also

also noticed my aux battery was a a little low on water, topped it up now having issues with it.. it isn’t holding charge that well keeps dropping to 12.6-12.7 over night usually stays at 12.8-12.9 for a few days

so might have to look in to a new battery too

['Dan']

Ohhh exciting

[Hostile1]

Good to see you got some parts rolling in. Sounds like you got a pretty good deal from TJM. Can’t wait to see it all.

[Gurilla]

Just put a deposit on some more tjm goodies

bull bar and snorkel is about paid off, decided to get side steps and brush bars also and color coded, they are going to color code all for free,

also got a uniden twin pack 6.6dbi and 3dbi antenna installed for free I’ll use my own uhf,

also a tjm 9500 winch installed for free

now my bill went up a few grand aha :/ hoping to pay off $500 a week


been talking to Zordo and I’ll be getting dobinson and Bilstein kit off him with extended sway bar links, will try to install my self doesn't look hard just need to find a trolley jack big enough..

['Dan']

dan

Lurker

Find all posts

View Profile

Close

dan yeah mate all good they gave me a HiLux to use for about a week, car drives perfectly fine I thought would drive different but it feels just about the same done about 1500km since

That's great news, especially if nothing was missed or damaged, you've beaten the odds

Nice work on the drawers.

[Gurilla]

Been busy with not being able to go anywhere over the holidays

made up some rear draws, removed the 3rd row seat and made up a false floor and built the frame etc

came up good pretty happy,

also rewired and neatened up some wiring I did wire and ran extra wires etc as i dont want to remove the draws to wire anything again ,

also installed a red/white light on the rear door good height and over the draws with no shadow