G'day guys,
I don't know why it's taken me so long to get on here but here I am. My name is Mark and I have been building 4WD trucks for a bit over a year now and this is my latest build. Here is a list of mods I have done so far. I am proud to say that I have done 99% of the changes on my Prado myself. I will be completely transparent with what I have and haven't done myself. If you want more information about what I have done Here are my mods/changes:
- RhinoRack backbone and platform
- Kaon Maxtrax bracket
- 4 x Maxtrax
- Stedi lightbar with platform low mount adapter
- 4 x Stedi rock lights with backbone brackets
- Interior button to control rock lights outside
- RhinoRack tie down kit (for my swag)
- 23Zero Shower Tent Awning on custom low profile batwing bracket
- Rhino Rack Dome awning (hard to find) on custom low profile batwing bracket
- Custom solar panel mounts on roofrack
- Seat 6 and 7 delete
- Seat 5 delete (behind front passenger)
- Custom DIY false floor
- Sound deadened rear floor
- Custom DIY double horizontal drawer system
- Kaon interior shelf
- Custom Amber rock lights mounted on shelf
- Kaon fold down table
- 2 x XTM fridge slides
- Mycoolman 53 Dual zone on custom risers
- DIY pantry with foldout table
- 12V system with removable 100AH lithium battery
- Additional USB plug installed in dash for power to Garmin In-Reach
- Wet suit car seat covers
- 25 Amp Hour BCDC Redarc charger
- Custom anderson lead with hidden input to battery system (for long stays I can connect my solar panel or fold out blanket when I buy one)
- Dometic inverter for small appliances (camera battery and charging computers)
There is a lot here (I'm sure I have missed something) and if you have any questions, I am more than happy to answer them. On the exterior, my Prado looks stock but this has saved me a pile of money focusing on my camping experience. On this setup, I have spent about as much as I would have paid for a bullbar from ARB. I am looking at getting a tow bar next and new rims and a modest lift.
I don't know why it's taken me so long to get on here but here I am. My name is Mark and I have been building 4WD trucks for a bit over a year now and this is my latest build. Here is a list of mods I have done so far. I am proud to say that I have done 99% of the changes on my Prado myself. I will be completely transparent with what I have and haven't done myself. If you want more information about what I have done Here are my mods/changes:
- RhinoRack backbone and platform
- Kaon Maxtrax bracket
- 4 x Maxtrax
- Stedi lightbar with platform low mount adapter
- 4 x Stedi rock lights with backbone brackets
- Interior button to control rock lights outside
- RhinoRack tie down kit (for my swag)
- 23Zero Shower Tent Awning on custom low profile batwing bracket
- Rhino Rack Dome awning (hard to find) on custom low profile batwing bracket
- Custom solar panel mounts on roofrack
- Seat 6 and 7 delete
- Seat 5 delete (behind front passenger)
- Custom DIY false floor
- Sound deadened rear floor
- Custom DIY double horizontal drawer system
- Kaon interior shelf
- Custom Amber rock lights mounted on shelf
- Kaon fold down table
- 2 x XTM fridge slides
- Mycoolman 53 Dual zone on custom risers
- DIY pantry with foldout table
- 12V system with removable 100AH lithium battery
- Additional USB plug installed in dash for power to Garmin In-Reach
- Wet suit car seat covers
- 25 Amp Hour BCDC Redarc charger
- Custom anderson lead with hidden input to battery system (for long stays I can connect my solar panel or fold out blanket when I buy one)
- Dometic inverter for small appliances (camera battery and charging computers)
There is a lot here (I'm sure I have missed something) and if you have any questions, I am more than happy to answer them. On the exterior, my Prado looks stock but this has saved me a pile of money focusing on my camping experience. On this setup, I have spent about as much as I would have paid for a bullbar from ARB. I am looking at getting a tow bar next and new rims and a modest lift.