Will package together everything below for $1,200. The ultimate roof platform setup for utility and/or touring.
Approx. $2,500 in total when bought new.
Can arrange delivery on smaller items at buyers expense.
Will consider "meeting half way" in South East NSW for a small fee - I am located in the Snowy Mountains, 20 mins North of Jindabyne.
Item: Rhino Rack Pioneer Platform (42102B, I think...?) with all mounting hardware to suit 120 Series.
Condition: Used. Some scuffs.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: Looking for $700, will consider reasonable offers. Not in a rush to sell.
Detailed information:
Pictures: Yep.
Platform (will give it a wash before it goes to new owner, was in a rush when I took it off)
Platform mounting rails
Platform mounting brackets to suit 120 Series
Item: Rhino Rack Hi-Lift Jack and Shovel Holder
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $100
Detailed information:
Pictures: Yep.
Item: Rhino Rack Dual Vertical Jerry Can Holder
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $150
Detailed information:
Pictures: Yep.
Item: Pair of Stedi Reverse / Work Lights, with Rhino Pioneer Light Brackets
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $150.
Detailed information:
Pictures: Yep.
Item: STEDI 40 Inch Light Bar with 4 Rhino Pioneer Light Brackets (very sturdy)
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $250.
Detailed information:
Pictures: Yep.
Approx. $2,500 in total when bought new.
Can arrange delivery on smaller items at buyers expense.
Will consider "meeting half way" in South East NSW for a small fee - I am located in the Snowy Mountains, 20 mins North of Jindabyne.
Item: Rhino Rack Pioneer Platform (42102B, I think...?) with all mounting hardware to suit 120 Series.
Condition: Used. Some scuffs.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: Looking for $700, will consider reasonable offers. Not in a rush to sell.
Detailed information:
- Sold the faithful 120, stripped the goodies off it before moving it on. Have joined the Hilux club now, simply more practical for what I need.
- The platform was used frequently for work, so it has quite a few scuff marks where the black powdercoat has worn away, mostly from loading a ladder on/off. See the photos.
- There are no dents or mechanical damage, nothing that would otherwise affect performance.
- The platform will come with all the hardware required to bolt straight onto a 120 Series.
- There is cabling run through the platform to power two rear work lights, and one front light bar. You will need to extend these cables, as they were cut at the bracket locations for quick removal. I ran the cabling up the side of the windscreen, and through the bottom of the two front brackets. Worked a treat. (These lights are also listed below for sale)
- Have 8 eye bolts that will be included. 4 of the 8 are genuine Rhino Rack, the other 4 are aftermarket. Just need to dig through the garage to find them!
Pictures: Yep.
Platform (will give it a wash before it goes to new owner, was in a rush when I took it off)
Platform mounting rails
Platform mounting brackets to suit 120 Series
Item: Rhino Rack Hi-Lift Jack and Shovel Holder
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $100
Detailed information:
- Used, but spent more time off the vehicle than on. Pretty good condition.
Pictures: Yep.
Item: Rhino Rack Dual Vertical Jerry Can Holder
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $150
Detailed information:
- Used, slightly askew due to a small incident with an overhead branch.
- Spent most of life off the vehicle after the branch incident, but still very usable.
- Two plastic jerry cans still fit inside (a bit snug, but not a wrestle) in current condition. Steel cans may struggle.
- Could easily be straightened, I never bothered due to lack of use, and is still functional as it is. (Probably wouldn't notice unless pointed out)
Pictures: Yep.
Item: Pair of Stedi Reverse / Work Lights, with Rhino Pioneer Light Brackets
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $150.
Detailed information:
- To be sold as a pair
- These plug straight into the sockets that are still mounted to the Pioneer Platform
- Used, paint slightly faded on lights.
- A fixing bolt on one light is mildly threaded (yes, "mildly"). Never had any issues. Pretty confident Loctite would fix it if you are worried.
- Very bright for their size, perfect for reversing and/or work lights
Pictures: Yep.
Item: STEDI 40 Inch Light Bar with 4 Rhino Pioneer Light Brackets (very sturdy)
Condition: Used.
Reason for sale: Sold the car, removed accessories before selling.
Price and sale conditions: $250.
Detailed information:
- Used, paint a bit faded, fixing bolts a bit rusty (from roads being heavily salted in snow prone areas)
- Comes with security nut set and matching socket tool
- Throws heaps of light
Pictures: Yep.
Comment