Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 1.3225 seconds.
Keywords
Members
Tags
-
Anything above a 2" lift you will have issues getting the alignment correct but 2" and under isn't an issue.
-
-
It is great to see what others are doing to their Prado from all over the world.
Please keep sharing.
Leave a comment:
-
Sounds very painful. Good thing you had a big enough tool. ...
Leave a comment:
-
-
Welcome back Spilsy.
You will have fun fitting all the new bits. The light bar looks alright and Stedi do make some good gear.
Leave a comment:
-
For what it is worth, my two cents on this subject.
36psi when empty and then up to 38psi in the rear when loaded has given me good wear...
Leave a comment:
-
I know they are not on your list but have been running Bridgestone Dueler A/T D697 for years. Have traveled through the Flinders Ranges, Vic high country,...
Leave a comment:
-
You can always use a "bridle strap" between the two recovery points on the ARB bullbar and this will help evenly distribute the load.
Leave a comment:
-
Same as above but here is a different thread on the same subject
https://www.pradopoint.com.au/forum/...n-only/engine-...
- 1 like
Leave a comment:
-
Ok I have now resolved the issue. It appears that I can't count as I checked the wrong fuse last time I looked.
The tail light fuse was blown and...
Leave a comment:
-
-
I have read somewhere that if the rear side windows have an extra dark tint on them that will effect the radio reception as the antenna is in the glass...
Leave a comment:
-
Thanks for that I will check tonight. The brake lights still work....
Leave a comment:
-
No tail lights, park lights or fog light
While do a pre trip inspection on the weekend I discovered that the tail lights, park lights, and fog lights don't work.
Well I have checked...
Leave a comment: