Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2469 seconds.
Keywords
Members
Tags
-
According to the parts diagram there are three servo assemblies, one on the fan unit for fresh air or recirculate. One on the right side of the heater...
-
From memory there is a locking clip on it, easier to remove the lower panel to give better access to it. I have never loked for the baffels, if you remove...
- 1 like
Leave a comment:
-
If it is the same setup as the prado the thermister is clipped into the lower instrument panel cover. there is a tube connected to the assembly which...
Leave a comment:
-
-
The Toyota system generally works fine, yes some may have had issues but how many out of the millions of Prados sold. If you not having any issues I would...
Leave a comment:
-
I,m assuming the key light is flashing indicating the keys fob isn't recognised, if this is the case then you need to program the new key into the cars...
Leave a comment:
-
Follow the diagram on the label, if your have the socket on the correct pulley and lever it in the direction shown your doing up the bolt....
Leave a comment:
-
Never removed one but I believe it is bolted in from the bottom of the fuse box so yes the fus box needs to be removed
Leave a comment:
-
Sounds like the thermo fan needs refilling with silicon oil.
- 1 like
Leave a comment:
-
Maybe it is seeing a door or possibly window not shut properly, check door switches and windows.
Leave a comment:
-
Toyota rebuilt unit, have you checked the fuse that powers the alternator and the ALT-S and the main alt output fuse?
Leave a comment:
-
If your going to replace the cranker with a Lithium then it will ahve to be directly charged off the alternator. If your going to do that then you may...
- 1 like
Leave a comment:
-
You will need to plug in an ODBII scanner and read the diagnostic fault code to what triggerd the warning lights and reset. The comination of lights your...
Leave a comment:
-
-
Something wrong, volts at aux should be very close to those of the cranking battery, check isolator, wiring etc. You can also install a booster diode...
Leave a comment:
Leave a comment: