Announcement
Collapse
No announcement yet.
Search Result
Collapse
101 results in 0.0135 seconds.
Keywords
Members
Tags
-
Yes speed is done from the end of the transfercase so you will need gps to give you speed. I think in the newer models it went to wheel/abs sensors for...
-
Thats one way of upgrading.
Do you think you could fit one in the front too?
And is it just the 120 diff gears you are using in the rear?...
Leave a comment:
-
It should be very sparingly used that grease too. Maybe you could try and flush it out with more of your lanolin spray. Pull the boot from the clutch...
Leave a comment:
-
The wrong grease on the input shaft could do this. I think its meant to be a graphite type.
You could ring and ask whoever did the clutch job what...
Leave a comment:
-
That transfer case lever statement was what you need to do. The right one goes forward so just lever it back with a screwdriver into the middle with the...
Leave a comment:
-
Great reply. Thanks very much that explains a lot to me. Workmanship is going down in many areas and its really interesting to hear whats happening in...
Leave a comment:
-
Ive got some instructions here about how to do the transfercase lever. I wont do it for a few days as its ok as is but il reply if it doesnt work
...
Leave a comment:
-
Test drive all went well. IIt was a bit noisy for a split second as i went into each gear for the first time, my fault for not pre-oiling. But after that...
- 1 like
Leave a comment:
-
Ive got it all back together, Just installing gear oil and a few tidy up torquing of bolts. Getting it in was a real pain. Having a helper would be great....1 Photo
Leave a comment:
-
I was thinking about what you wrote here Leethal while working on the car yesterday, Mechanics here wont touch a manual transmission, they send them away...
Leave a comment:
-
-
Ive the gears together and next step is to seal her up and check operation before installing. All sounds easy but it wont be, so i expect another two...
Leave a comment:
-
Ive got the gearbox shafts now apart. Pressing needed was the adaptor locking plate on the end after the 5th gear. This takes two 8mm bolts to connect...4 Photos
Leave a comment:
-
3rd and 4th gear Vanished
Ive a KZJ95 1kz-te manual.
Driving along i went to go to 3rd and it didnt exist. Neither did 4th, the rest of the gears were fine. There was no...4 Photos
-
I doubt itd be the fuel pump, youd notice that when driving too and when warm. Have someone keep priming the fuel pump on the fuel filter while trying...
Leave a comment:
Leave a comment: