Announcement
Collapse
No announcement yet.
Search Result
Collapse
50 results in 0.0100 seconds.
Keywords
Members
Tags
-
Check for the child restraint holes. I used the third row seat holes and the child restraint holes in my 95 series.
-
If you worried about removing it just leave it there but tape it into position and pump polyurethane sealant around it to secure it. Smooth off with a...
Leave a comment:
-
I run airbag man blue air bags with Kevlar sleeves at 35psi. Load is at 450kg and 600 kg with boat hooked up. Ride is better than with the standard suspension....
Leave a comment:
-
Yeah get a torch and you will find them, you can’t see with the naked eye, completely out of view.
Leave a comment:
-
You’re limited with droop as the UCA will only go so far as standard. Any more than 2 inch and you CVs will not thank you for it. Unless you are...
Leave a comment:
-
Just done mine. But I ran the cable down the were the firewall and inner guard meet and then through the chassis rail.
You have to run some wall...
Leave a comment:
-
I use a degreaser air gun with boiling water to release salted up zippers on boats. I’d use that as a heat source over a heat gun as I recollect...
Leave a comment:
-
I am working on my own multi-sensor temperature
I’ve seen a gauge on flea bay that looks pretty good, it shows engine, transmission...
Leave a comment:
-
Yes that’s the custom setting I used
‘Transmission Well Done 90 deg’
You can set different temps for an alarm to sound also....
Leave a comment:
-
Auto Transmission Temp Gauge
So viewers this is what I have come up with while having a light bulb moment at Bunnings.
I was getting some gear for work when I came across temperature...
- 1 like
-
Don’t know how this ended up, but in my motoring lifetime I’ve installed two brand new batteries that have been dead as a maggot. So never...
Leave a comment:
-
Also Karl, leaking rocker covers is common. Don’t know about manuals as mine is auto. Jim
Leave a comment:
-
G’day Karl,
Front upper and lower ball joints, red flag them. I’ve got a 2000 VX, going on 14 yrs ownership with no issues. Just keep...
Leave a comment:
-
Check the PCV valve and your vacuum hoses. May even be worth cleaning the IAC valve at the throttle body too. The PCV valve can become blocked with sludge....
Leave a comment:
-
My 95 series got hammered a couple of years ago as I watched in horror. Company called Erazordent removed every dent to perfection. There were some that...
Leave a comment:
Leave a comment: