I have just bought a new cat 144-9962 fuel/water separator.
This assmbley has the 156-1200, 5 micron filter fitted to the housing and glass bowl.
I wanted to fit a 30 micron or 150 micron filter, so fuel flow wouldnt be restricted too much.
So I ordered a 100-6374 filter which is 30 micron, but this has been superseded to 138-3100, which is part number for a 150 micron filter.
When I got home I decided to remove the 5 micron filter, and fit the 138-3100 which is either a 150 or 30 micron filter.
The problem is that the locating lugs on the filters are not the same. See photos below.
So the filter will not locate into the housing, to enable the filter to be pushed up.
So there must be another filter housing for the 138-3100 filters!
Can anyone help?
Or have I just got 2 dodgy 138-3100 filters?
[IMG][/IMG]
[IMG][/IMG]
This assmbley has the 156-1200, 5 micron filter fitted to the housing and glass bowl.
I wanted to fit a 30 micron or 150 micron filter, so fuel flow wouldnt be restricted too much.
So I ordered a 100-6374 filter which is 30 micron, but this has been superseded to 138-3100, which is part number for a 150 micron filter.
When I got home I decided to remove the 5 micron filter, and fit the 138-3100 which is either a 150 or 30 micron filter.
The problem is that the locating lugs on the filters are not the same. See photos below.
So the filter will not locate into the housing, to enable the filter to be pushed up.
So there must be another filter housing for the 138-3100 filters!
Can anyone help?
Or have I just got 2 dodgy 138-3100 filters?
[IMG][/IMG]
[IMG][/IMG]
Comment