Announcement
Collapse
No announcement yet.
Search Result
Collapse
500 results in 0.2122 seconds.
Keywords
Members
Tags
-
I have a similar setup as you (2019 car, towing similar weights). I don't believe a cooler is a must however it will increase the life of the gearbox...
- 1 like
-
Good stuff.
I think the bleed screw on the pre-filter head is only useful if you have a primer installed. I've tried opening it and pumping...
Leave a comment:
-
The pre-filter head is probably sucking in air from one of it's seals under vacuum when the engine's running. Try nipping up the hose connections and...
Leave a comment:
-
Yeah, know that feeling.
If the shock absorbers are the only part that's different, you might get away with it.
Alternatively,...
Leave a comment:
-
Agreed. A remap will improve response a little, mainly due to more low down torque increase and removing or increasing torque limits in lower gears....
Leave a comment:
-
-
I'm getting 13.5v at idle after driving for a hour. 13.65 on cold start up. There's no hall effect sensor on the negative to measure current. Same...
Leave a comment:
-
I had the same on my 120 series 1kd at around 200 000km. After changing belt and pulleys, found out it was the alternator. The over ride clutch built...
Leave a comment:
-
You'll get better gearbox behavior if you remap. With a chip, you'll get more power but gearbox lockup won't improve unless you get a lockup kit as ...
Leave a comment:
-
I've been using 5w30 C3 in between dealer services since new. No issues. I found it burns off less than the 0w30 the dealer uses. Don't get as much...
Leave a comment:
-
Breather Hose Size
Hi,
I'm looking to extend my transfer case and transmission breathers before a Cape trip. Anyone know the hose size for the 2 x transfer...
-
-
Thanks. I'll have a look at the ARB info. I didn't see a light bar on the Toyota catalogue for the 150 series, only the 300 series. I asked to have...
Leave a comment:
-
Factory Bull Bar Light Bar Recommencation
Hi,
Looking to install a light bar on by factory alloy bull bar (2019 Prado). Any recommendations on a model that will fit the existing...
Leave a comment: