Hi everyone,
First post so I will try to keep it short. I have major issues with start up (16 months now) and just recently started blowing white smoke. I have been to multiple mechanics, three Cmi Toyota dealerships and a number of locals mecs for overnight cold starts and left for days with no one claiming to be able to solve the problem.
Codes 1604 and 1605 startart ability and rough idle have shown on computer but no one seems to be able to solve the problem.
Majority of startups result in long crank time being between 5-9 second prior to start and sometimes clonking out once started. Recently started blowing a lot of white smoke when starting on first push of the button. Smoke would last for a couple of minutes up the road before clearing. Car runs fine once driving bar start up issues and smoke.
I have 100,000k on the clock and serviced regularly. On testing, rail pressure dropped on startup so I had the injectors checked on was told, with readouts that they were slightly out of spec so had them changed. New suction control valve and starter moter have also been replaced.
I am currently at wits end and don't know where to go from here. One Cmi dealership told me to keep driving it and when the problem gets worse they will be able to see what the problem is??? because the error code wouldn't last long enough for them to get a proper readout.
Any help would be much appreciated.
Thanks Mick
First post so I will try to keep it short. I have major issues with start up (16 months now) and just recently started blowing white smoke. I have been to multiple mechanics, three Cmi Toyota dealerships and a number of locals mecs for overnight cold starts and left for days with no one claiming to be able to solve the problem.
Codes 1604 and 1605 startart ability and rough idle have shown on computer but no one seems to be able to solve the problem.
Majority of startups result in long crank time being between 5-9 second prior to start and sometimes clonking out once started. Recently started blowing a lot of white smoke when starting on first push of the button. Smoke would last for a couple of minutes up the road before clearing. Car runs fine once driving bar start up issues and smoke.
I have 100,000k on the clock and serviced regularly. On testing, rail pressure dropped on startup so I had the injectors checked on was told, with readouts that they were slightly out of spec so had them changed. New suction control valve and starter moter have also been replaced.
I am currently at wits end and don't know where to go from here. One Cmi dealership told me to keep driving it and when the problem gets worse they will be able to see what the problem is??? because the error code wouldn't last long enough for them to get a proper readout.
Any help would be much appreciated.
Thanks Mick
Comment