ARB winch bar

[kav Avid PP Poster! Find all posts View Profile Close kav]

the screws are at the wrong angle if you turn them the other way

[craigm Addicted PP Member Find all posts View Profile Close craigm]

Here's something I hadn't thought about before - I see your lights are mounted with the indicators inside where I fitted them on the outside. Does it make any difference?

Mine's the same as yours also Trekrider. I have seen the lights orientated both ways across a number of cars. It'd be interesting to see if there is an ADR relating to this....

[Trekrider Banned Find all posts View Profile Close Trekrider]

the screws are at the wrong angle if you turn them the other way

I did notice you can't just turn them over as they are supposed to be fitted with the drain holes at the bottom - you have to swap from left to right.

[craigm Addicted PP Member Find all posts View Profile Close craigm]

I'll have a closer look when I get home tonight. I do need to replace the lenses anyway as they are quite faded. Unsure of the cost of replacement lenses but I have seen somewhere on this forum a product that you can apply to re-stain the orange part of the lense....A good reason to take em out and check....

Edit....Indicators are definitely on the outside. Lenses are so faded its hard to tell without lights on... I will ring ARB for replacement price.

[8608 Advanced Member Find all posts View Profile Close 8608]

the parkers are there to indicate width, so they need to be on the outside or at the widest part of the vehicle. the indicator assemblies have two drain holes which need to be on the bottom.

[Trekrider Banned Find all posts View Profile Close Trekrider]

the parkers are there to indicate width, so they need to be on the outside or at the widest part of the vehicle. the indicator assemblies have two drain holes which need to be on the bottom.

Sounds like I need to swap mine over then.

[craigm Addicted PP Member Find all posts View Profile Close craigm]

Edit....Indicators are definitely on the outside. Lenses are so faded its hard to tell without lights on... I will ring ARB for replacement price.

$22 per assembly. ARB still do not have an LED alternative. I will look around for another option. Sure I've seen a mod somewhere on this site...

Edit Found link to Mod..... Upgrading ARB lights to LED by D4D

[8608 Advanced Member Find all posts View Profile Close 8608]

i just fitted some LED globes to my original indicator/parker assemblies. (and added a bit of rice factor too)

[craigm Addicted PP Member Find all posts View Profile Close craigm]

Hmmm not too ricey.... Where did you end up getting these from?

[1coolbanana Avid PP Poster! Find all posts View Profile Close 1coolbanana]

Didnt like the black bar so it came off and got colour coded.
MUCH better I reckon

Surprisingly they painted the panels underneath as well. Not sure if I like it, it may grow on me!

Can someone tell me the globe type thats in the ARB fogs in the bar and how to get to them?

[Madkore Avid PP Poster! Find all posts View Profile Close Madkore]

That certainly does look... different. As for the fog lights, I had to replace a whole light (cracked the lens) - and it looked like a fairly sealed up unit. Without some sort of 'manipulation' I couldn't see how to just replace the globe... Not sure if you are asking how to get to the globe or the actual housing though...

[1coolbanana Avid PP Poster! Find all posts View Profile Close 1coolbanana]

Yeah, looks like a bugger.
I just want to get to the globes to be able to change them.
They look like an H1???

[Strider Member Find all posts View Profile Close Strider]

I cracked both my ARB fog lights, had them on and then did a water crossing. Hot lights and water don't mix. Something to wary of.

Cheers
Alan

[1coolbanana Avid PP Poster! Find all posts View Profile Close 1coolbanana]

I cracked both my ARB fog lights, had them on and then did a water crossing. Hot lights and water don't mix. Something to wary of.

Cheers
Alan

Were they the IPF's or the newer ARB branded ones?
How do you get the buggers out and do you know what globes are in them?
Ta

[sdd1970 Lurker Find all posts View Profile Close sdd1970]

When you mounted the plates, did you locate the other 2 edges inside the bull bar lip or underneath, mine is mounted inside and fits fine.

Scott