Originally posted by kevdebbi
View Post
Announcement
Collapse
No announcement yet.
Home made drawers under $110. Basic measurments added
Collapse
This is a sticky topic.
X
X
-
Originally posted by Hoody View PostThanks mate. Are the rear seat anchors the same?
Hope this helps.
Kevin.[FONT=Comic Sans MS][B][COLOR=#000080][COLOR=#FF0000]2003 V6 Parado Grande.[/COLOR][/COLOR]
Custom rear drawer system, Custom 6mm alloy bash plate and Custom rear steel bar, Dual battery and ARB duel compressor. SPC upper control arms. So far....[COLOR=#0000CD]See my build[/COLOR] [URL]http://www.pradopoint.com/showthread.php?31855-Kevdebbi-s-120-V6-Grande[/URL][/B][/FONT]
[SIGPIC][/SIGPIC]
Comment
-
Originally posted by kevdebbi View PostThe seat anchors on the floor are 10mm shank but have the metric fine thread (M10x1.25) not the normal size M10 thread which is a little courser (M10x1.5).
Hope this helps.
Kevin.
A note for others, if using 15mm ply base, you will need at least 50mm bolts
Comment
-
I have just returned from a 12 week tip to the Kimberley. During the trip I had to replace my drawer runners that were acting as my fridge slide with a genuine Engel fridge slide. The base plate for my drawers and fridge slide is 15mm Ply but it has bent/bowed in the middle, has anyone else had this problem. Mine drawers are fastened using 4 bolts and large washers, bolted into where the seat u-bolts would normally be. I would have thought that by bolting it down it would push the ply down not pull it up.
Comment
-
Originally posted by Corigator View PostI used marine carpet from Bunnings for mine. Can't recall the price, but cheaper than $50
http://www.bunnings.com.au/search/pr...directFrom=Any
Comment
-
Hi guys,
All very nice work in all cases. Have built mine but no pic yet and secured via the same bolt idea. Now onto the fold down table on the door.
I have all the brackets etc( thx to all for putting this info up). Just wanted to check in with respect to attaching the hinges etc. how long a screw is need to go from the hindes to the metal behind coverings?
Thank you
Pierre
Comment
-
Last edited by foxclan; 28-02-2015, 04:16 PM.SOUTH AUSTRALIA GATEWAY TO THE OUTBACK!
2003 GXL V6 AUTO 120 CHAMPAGNE MICA [DUNE]
LIST OF ACCESSORIES GROWING, WISH LIST SLOWLY DECLINING
Comment
-
Originally posted by JPH View Postnice work mate! Must make one for myself!
Only I posted in the wrong thread, however the first picture does show a rear draw.
You shouldn't have to much trouble whittling up a rear door table mate.
Cheers
TroySOUTH AUSTRALIA GATEWAY TO THE OUTBACK!
2003 GXL V6 AUTO 120 CHAMPAGNE MICA [DUNE]
LIST OF ACCESSORIES GROWING, WISH LIST SLOWLY DECLINING
Comment
Comment