Cheers amts
Announcement
Collapse
No announcement yet.
Rhino Pioneer Platform rack p/no 42103
Collapse
X
-
Originally posted by outback7 View PostHey if you don't mind me asking? What was the cost of the Rhino.......cheers mate.
Comment
-
Originally posted by KA_WA_11 View PostThanks for the picture Craig, is there much air noise??2004 V6 Grande. BLACK -
Comment
-
Hey Andrew, Im thinking about getting the #44103B and the Toyota/Rhino HD bars, thanks for the tip off on the Toyota spares trade price, I think this model is the same size as the one you fitted to your 120? 1928 x 1376 obviously I want to go black.
Was it much work to fit and can you tell me if you needed to modify it much? I don't have a rivet gun either...
http://www.rhinorack.com.au/products...1376mm-_44103b
Originally posted by amts View PostNote that the usual part number for the 120/150 is the 42102. I have ordered the 42103 which is 1376mm wide.
http://www.rhinorack.com.au/AccSubCa...rm_490_68.aspx
The 42102 is 1236mm wide
http://www.rhinorack.com.au/AccSubCa...rm_489_68.aspx
I've gone with the 42103 to get more width. It has an additional plank which would make it more useful for me. I currently run 3x 1375mm Aerobars with 2000x1100 old style Rhino platform and don't find the Aerobars too wide. So this new rack should be OK (well I hope so anyway).
The Pioneer platform rack has pre-drilled holes to suit the centre distance between the cross bars. Because the 42103 is not meant for the 120/150 Prado. I will have to drill my own holes, or at least utilise an existing hole for one cross bar and drill the remaining holes.
Anyway, hope this 'risk' will work out well. I've always been a big fan of the Pioneer platform rack so finally took the plunge after getting a great deal on it.
Photos to come when it arrives.
[ATTACH=CONFIG]7573[/ATTACH]120 GXL, D4D Auto 2007 - ARB Deluxe Bar, Warn Tabor 10K and Rec Kit, Safari Snorkel, GME UHF, BFG AT's, Lightforce Spots, Eclipse Sat Nav, Waeco CF40, Optima D27, Redarc Sbi12, Leigh W Diode, Voltmeters, Rhino Pioneer platform, ARB compressor, DIY Trek Table & drawers, HiLux Jets, Breathers, Water pump, rear custom fused electrical system, camp lights, LED's, ARB Roof top tent Annex and Awning, Maxtrax, Hi-Lift, Shovel. [URL="http://www.pradopoint.com/showthread.php?27929-DJ-D-s-D4D-120-GXL"]My Build Thread[/URL]
Comment
-
Thanks, I'm assuming the platform just bolts on to the HD bars with the channel nuts or something in that location.Originally posted by amts View PostYou won't need a rivet gun anymore as the new design is all bolt and nut assembly. All I needed to do was mark the new holes into the platform to match the distance of our crossbars.120 GXL, D4D Auto 2007 - ARB Deluxe Bar, Warn Tabor 10K and Rec Kit, Safari Snorkel, GME UHF, BFG AT's, Lightforce Spots, Eclipse Sat Nav, Waeco CF40, Optima D27, Redarc Sbi12, Leigh W Diode, Voltmeters, Rhino Pioneer platform, ARB compressor, DIY Trek Table & drawers, HiLux Jets, Breathers, Water pump, rear custom fused electrical system, camp lights, LED's, ARB Roof top tent Annex and Awning, Maxtrax, Hi-Lift, Shovel. [URL="http://www.pradopoint.com/showthread.php?27929-DJ-D-s-D4D-120-GXL"]My Build Thread[/URL]
Comment
-
Originally posted by [email protected] View PostThanks, I'm assuming the platform just bolts on to the HD bars with the channel nuts or something in that location.
The platform comes with 3 loose half height bars that looks like the top half of the HD bars. These are placed with the channel opening facing downwards. These mount directly to the Rhino legs.
The HD bars that come with Toyota's kit is spare for you to use in other ways.
Comment
-
thank for your patience, I knew I was missing something. I think this is why I was confused, the 42102B includes "Bars"
http://www.rhinorack.com.au/products...1236mm-_42102b
So I guess you just add the gutter mount feet (HD feet). I was hoping to use 3 bars, with a RRT and other accessories it seems a better idea. So I could buy this and 6 feet and be done with it.
But the one which is 1928 x 1376 (44103B) is specific to SBX legs and seems to be 2 crossbars only. Also there is no 120 compatibility so I don't know if the SBX legs would be in the right place if I did decide to settle for 2 crossbars..
http://www.rhinorack.com.au/products...1376mm-_44103b
their website is pretty hopeless..
Cheers120 GXL, D4D Auto 2007 - ARB Deluxe Bar, Warn Tabor 10K and Rec Kit, Safari Snorkel, GME UHF, BFG AT's, Lightforce Spots, Eclipse Sat Nav, Waeco CF40, Optima D27, Redarc Sbi12, Leigh W Diode, Voltmeters, Rhino Pioneer platform, ARB compressor, DIY Trek Table & drawers, HiLux Jets, Breathers, Water pump, rear custom fused electrical system, camp lights, LED's, ARB Roof top tent Annex and Awning, Maxtrax, Hi-Lift, Shovel. [URL="http://www.pradopoint.com/showthread.php?27929-DJ-D-s-D4D-120-GXL"]My Build Thread[/URL]
Comment
-
yea I feel like an idiot now.. just found it..
http://www.rhinorack.com.au/products...1376mm-_42103b
doesn't come up under Pioneer or Prado, you have to dig! cheers120 GXL, D4D Auto 2007 - ARB Deluxe Bar, Warn Tabor 10K and Rec Kit, Safari Snorkel, GME UHF, BFG AT's, Lightforce Spots, Eclipse Sat Nav, Waeco CF40, Optima D27, Redarc Sbi12, Leigh W Diode, Voltmeters, Rhino Pioneer platform, ARB compressor, DIY Trek Table & drawers, HiLux Jets, Breathers, Water pump, rear custom fused electrical system, camp lights, LED's, ARB Roof top tent Annex and Awning, Maxtrax, Hi-Lift, Shovel. [URL="http://www.pradopoint.com/showthread.php?27929-DJ-D-s-D4D-120-GXL"]My Build Thread[/URL]
Comment
-
Hi Andrew,
I a little confused (or thick or both). I Have a 150 GXL with factory roof rails, and two factory SXB-type bars clamped to the rails. I added an extra SXB bar because of previous carrying requirements. Looking at the RR catalog, it seems I now want a 44102 or 42102 platform (both seem to be 1928x1236). Do these fit on top of the SXB Sportz bars, or do I remove those three bars and somehow fit the platform to the existing three (six) legs?
As I'm worried about overall height, I was also wondering whether I should instead remove the factory rails entirely and fit the platform kit which is designed for the GX with no roof rails. I guess this would be a more expensive exercise, and nobody seems to know what the overall height difference would be.
Cheers
Dave
Comment
-
The 44102 comes with 2 Aero bars similar to what you already have. REfer to the fitting instructions here http://vpm.cdn.rhinorack.com.au/Inst...ioneer_SXB.pdf
You will need to reuse the SXB legs off your current crossbars and mount them to the 44102. You only need 2 crossbars and not 3 if you are mounting to the roof rails. The roof rails are curved so using 3 crossbars won't make it level.
Note that the weight capacity of the roof rails is 75kg. You are better off removing the roof rails and use RLCP type legs and feet to mount the 42102 or 42103 to get 100kg weight capacity on the roof.
Note that Toyota's quoted weight capacities include the roof rack/platform that you put on.
Comment
Comment