Yes I had to drill out the holes in the 2nd and 3rd rows. Congratulations on your new rack!
Announcement
Collapse
No announcement yet.
Rhino Pioneer Platform rack p/no 42103
Collapse
X
-
Picked up and fitted my Rhino R42103B (B for Black - looks better than silver on mine) Pioneer Platform Rack today:
Rhino have changed the design but not the instructions - instead of the large number of rivets they now use bolt on saddle clamps:
Really easy to fit on my own - I had to drill new holes for the middle and rear cross bars as AMTS said but I just measured the spacing on the feet and transferred this to the rack. It all lined up first time so very happy with that.
I also got a Rhino Sunseeker II awning but I will have to make up some brackets to be able to fit this.
Comment
-
Originally posted by amts View PostI also made some channel nuts for my awning bracket and Maxtrax holders. Can't use ordinary channel nuts anymore on the rack as there is not enough contact length.
Comment
-
Here's a pic of the rack with awning, maxtrax holder and spacecase mounted on top of the rack. Each awning bracket is mounted to the rack using custom (longer) channel nuts, with the centre hole of the channel nut taking an M10 eyebolt. I figured there was no point using another channel nut for a separate tie down point.
Last edited by amts; 19-02-2013, 11:35 PM.
Comment
-
Looks great Andrew!
The Rhino Pioneer Platform (Black) will be my next purchase.
Thanks for the pics mate.
Cheers,
Jeff[SIZE=3]Jeff[/SIZE]
[SIZE=1]2012 | VX | D4D | Auto | Crystal Pearl | LightForce Genesis 50W HID's | ARB UVP | TJM Bar | Tow Bar | Rhino Pioneer Rack | Outback Ideas Points | Airtec Snorkel | Diff Breathers | Uniden UH7760NB UHF | Uniden UH076SX-NB UHF | Bilstein B6 Offroad Shocks | XGS Springs | TG150 | ARB Compressor | Redarc Trailer Brake | Projecta Anderson Plug | Hannibal RTT |[/SIZE]
Comment
-
Have a look at Brains Rig Build here
http://www.pradopoint.com/showthread...031#post425031
Sent from my iPhone using Tapatalk2004 V6 Grande. BLACK -
Comment
-
Originally posted by Trekrider View PostPicked up and fitted my Rhino R42103B (B for Black - looks better than silver on mine) Pioneer Platform Rack today:
Rhino have changed the design but not the instructions - instead of the large number of rivets they now use bolt on saddle clamps:
Really easy to fit on my own - I had to drill new holes for the middle and rear cross bars as AMTS said but I just measured the spacing on the feet and transferred this to the rack. It all lined up first time so very happy with that.
I also got a Rhino Sunseeker II awning but I will have to make up some brackets to be able to fit this.
Hey if you don't mind me asking? What was the cost of the Rhino.......cheers mate.
Comment
-
Has anyone installed the Rino platform with the OEM rails still in place??
If you have can you post a couple of pics?Last edited by KA_WA_11; 16-08-2013, 12:05 AM.
Comment
-
Comment