What nudge bar is this?

[Tock Lurker Find all posts View Profile Close Tock]

Hi guys - just picked up an 05 GXL diesel which came with a nudge bar and bolts/brackets (not fitted).

I am looking for install instructions but not sure what brand it is - can anyone advise?
Only sticker on the bar says "FB 015128"



Cheers.

[craigm Addicted PP Member Find all posts View Profile Close craigm]

That'll be an ebay special. These go for anywhere between $2 - $300. You might be able to contact a local reseller on ebay and if you're lucky, might be able to scan something for you...

[Hendo66 Junior Member Find all posts View Profile Close Hendo66]

I would repackage and send back to India, that is atrocious.

[LPG liquid injection Lurker Find all posts View Profile Close LPG liquid injection]

Stainless Prado nudge bar

I bought one of these bars from eBay and picked it up from TJM, Dandenong. The brackets don't fit exactly to the holes in the chassis. TJM had no idea how to fit it but suggested you might have to slot the holes in the mounting brackets to make it fit. They also suggested removing the radiator to get the bolts to fit properly (being careful not to set off the airbags!). Needless to say, mine is still sitting at the back of the shed! I have scanned the "fitting instructions supplied" - see if you can make sense of it! Good luck

[Tock Lurker Find all posts View Profile Close Tock]

Oh boy! That does not look fun...
Thanks for taking the time to scan and put up the... instructions? I have a feeling this one might go back on ebay! :???:

[Tock Lurker Find all posts View Profile Close Tock]

Was there a genuine nudge bar for the 120? Or just bull bars?

[Guest Close Guest]

There was a genuine nudge bar and it looks like this


I had a TJM nudge bar which does not reduce the approach angle. It looks like this here
http://www.pradopoint.com/showthread...l=1#post389237

[Tock Lurker Find all posts View Profile Close Tock]

Time to start looking at a Sovreign or an ARB bull bar!