Tweet
Home sick actually.. (have been all bloody week with a bit of a runny nose)
-
-
That is just sooooo badOriginally posted by craigm View PostHome sick actually.. (have been all bloody week with a bit of a runny nose)
Steve.Stephen Bloomer
I did have - 2010 GXL D4D Auto, ARB bullbar, rails, sliders, winch, 40mm lift, Brown Davis bash plates and long range tankComment
-
I've seen several different numbers quoted on various supplier websites - perhaps theses were their own part numbers rather than the Bosch ones.Originally posted by craigm View PostComment
-
For the 120 Bosch part numbers BBA530 and BBA550, the number is the length of the wiper in mm.[url=http://www.myswag.org/index.php?topic=12264]My Prado[/url]Comment
-
I picked up a set today from Bursons at Capalaba. $24.20 for both. The part numbers on the ones I got are, BBE550 and BBE500 which are different from what craigm and D4D has posted. Mine are described as ECO wiper blade. Are these the correct ones?
cheers
Jim2004,GXL V6 Auto. ARB bullbar,IPF 900 spotlights, Milford cargo barrier, GME TX3400UHF, Coupler Tec, Cooper AT3's, Safari Snorkel, Dual batteries, King Springs and Bilsteins.Comment
-
According to the PDF I downloaded off the Bosch website, the BBExxx are the standard wiper blades as opposed to the Aerotwin or Performance Blades...2004 V6 Grande. BLACK -Comment
-
Are the Aerotwin or Performance Blades better?2004,GXL V6 Auto. ARB bullbar,IPF 900 spotlights, Milford cargo barrier, GME TX3400UHF, Coupler Tec, Cooper AT3's, Safari Snorkel, Dual batteries, King Springs and Bilsteins.Comment
-
I got around to fitting them today and they seem to do the job much better than the OEM blades. Biggest hassle was trying the find the plastic cover which goes over the retaining nut when it fell into the engine bay. 5 minutes to do the blades, 20 minutes searching for the cover.2004,GXL V6 Auto. ARB bullbar,IPF 900 spotlights, Milford cargo barrier, GME TX3400UHF, Coupler Tec, Cooper AT3's, Safari Snorkel, Dual batteries, King Springs and Bilsteins.Comment
-
I put the Aerotwin on and they are very good. The two sizes required werte the same price at $31.00 from Bursons, better than the $44.00 each from Toyota.
See ya on the tracks. Richo.[B]Former [/B]Party Leader, [B]Now[/B] SDO SEQLD GTG 2015 PFA (Pradopoint Fairy Advisor)
[B]Bitumen - A Blatant Waste of Taxpayers Money[/B]Comment
-
Got to like that better and cheaper than Toyota....Originally posted by Richoson View Post[B]Robert
[URL="http://www.pradopoint.com/showthread.php?32134-Gumboot-s-120-D4D-GXL"]2007 D4D GXL Prado[/URL][/B]
[I]"The true measure of a man is how he treats someone who can do him absolutely no good."[/I]
[SIGPIC][/SIGPIC]Comment
-
so can anyone tell me the part numbers what they are as I need to order some?Comment
-
Go with what D4D recommend for the 120Originally posted by D4D View Post
Sent from my iPhone using Tapatalk2004 V6 Grande. BLACK -Comment
-
Craig,Originally posted by craigm View Post
I thought you said the part codes were BBA500 - passenger & BBA600 - driver for the prado 120?
Cheers
Robert[B]Robert
[URL="http://www.pradopoint.com/showthread.php?32134-Gumboot-s-120-D4D-GXL"]2007 D4D GXL Prado[/URL][/B]
[I]"The true measure of a man is how he treats someone who can do him absolutely no good."[/I]
[SIGPIC][/SIGPIC]Comment
-
I had ordered the blades to suit the 120 (as per the catalogue) What they ended up giving me was as per above (BBA530 - passenger & BBA550 - driver). I have just been out to check how close my blades come to the edge of the windscreen and the Passenger blade (currently BBA530) is approx 10 - 15mm from the edge of the screen at the closest point (A pillar when switched off), which is spot on and the Drivers side (currently BBA550), is approx 50 - 60mm from the edge of the top of the windsreen when the blade is in the vertical position, so you could safely go the BBA600 for the drivers side.
To summarise, I recommend...
Drivers side BBA600
Passenger side BBA5302004 V6 Grande. BLACK -Comment
Comment