ARB Air Lockers switches - what is the best spot to mount?

[lc120_man Advanced Member Find all posts View Profile Close lc120_man]

Fitting the rear locker over weekend and trying to work out
what is the best spot for compressor/lockers switches for ease of use/access during driving?

Pics would be handy

[Guest Close Guest]

I was going to put the Compressor switch in the blank panel to the RHS of steering wheel. (Near mirrors adjustment), I am also planning on putting the locker button on the LHS by 2nd start button.
This way there is no way you can bump them both at same time and inadvertantly turn them on!
And you can use the compressor without having to get into the vehicle to reach the button. (If using for tyre inflation).

Another option is compressor on RHS or LHS of wheel and locker buttons on console in centre.

You dont want them all together as you could accidently have them all bumped on resulting in possible unpleasantaries if on bitumen ! :shock:

[Drew Advanced Member Find all posts View Profile Close Drew]

possible unpleasantaries if on bitumen ! :shock:

Sounds like "BANG"

Good thinking putting them separate. Most trucks I see have them smack bang <!> next to each other.

Looking forward to a write up on your install, Stan. A mod I might consider one day.

Cheers,

Drew.

[lc120_man Advanced Member Find all posts View Profile Close lc120_man]

Thanks eveyone, looks like I'll have to move the switches ...
While there is almost no way to bump them up, while mounted on rhs,
the biggest problem would be the SWMBO and the kids going
"hmmm, I wonder what this new button does ..." :twisted:

I'll see if I can post some photos on the weekend of sliders/lockers setup...

[lc120_man Advanced Member Find all posts View Profile Close lc120_man]

A bit of report on here: http://www.pradopoint.com/viewtopic.php?t=776