Originally posted by wooley
View Post
Announcement
Collapse
No announcement yet.
7" 55W HID euro and spot beam driving lights
Collapse
X
-
Originally posted by amts View PostWill do. What beam do you need? Euro or spot? They also do 4" (35W & 55W), 7" (35W & 55W) and 9" (35W, 55W & 70W).
7" was the biggest I could fit on the Sovereign bar and I'm looking to put a 3rd one in the middle. These lights are best on ARB type bars as the rear is quite long for the ballast and the ARB type bars have a large flat area to accommodate these.Originally posted by amts View PostThere's a 4" version :-)2011 150series GXL
Comment
-
Originally posted by wooley View PostLooks good, lgp.
Out of interest, how did you mount them on the top bar?
I'm looking to do the same with some Lightforce XGT's
They certainly do the job i wanted and need out here, but having said that, cost a 'tad' more than $85 eachOur 6 year old and 3 year old try their hardest to make sure there is no time or money for the other baby
Comment
-
7 inch - 55 watt Euro Beam x 2 for me pls - but before I commit - can the globes be replaced or are they part of the reflector? And are they available in any other body colour apart from black with red rim? (black/blue or black/black would be nice). Do they also come with protective covers?2008 120 D4D GXL Auto, ARB Bar.
OME Suspension, GME UHF, Alpine Stereo.
Rear Spoiler, Hilux bonnet scoop. Hilux Washer Jets.
....... more to come .......
Comment
-
Originally posted by letsgoplaces View PostDave, i got the spotlight mounts from ARB Regency Pk (about $30/pair). After mounting them, with just a bit of weight on the light made it move so i pop riveted them to the bar. Anyway after 4 hours of corrugations the rivets snapped and they were looking at the road right in front of the bullbar So now they have been tek screwed into place and haven't budged since.
They certainly do the job i wanted and need out here, but having said that, cost a 'tad' more than $85 each
I've been debating whether they ones I've used for aerials are 'strong' enough for lights. Only one way to find out I suppose.2011 150series GXL
Comment
-
Originally posted by wooley View PostHm... I'm wondering if they're like the aerials mounts I got from them. Any close up pictures?
[QUOTE=wooley;356791I've been debating whether they ones I've used for aerials are 'strong' enough for lights. Only one way to find out I suppose[/QUOTE]
Tek screws are your friend... but only if you don't mind putting holes in the top of your bullbar :shock:
I figure i'll be keeping mine till pretty much death til do we part. I offered it to my 5 year old for when she starts driving, but she declined a free car cause it's not 'rainbow colours'Our 6 year old and 3 year old try their hardest to make sure there is no time or money for the other baby
Comment
-
Originally posted by SGS View Post7 inch - 55 watt Euro Beam x 2 for me pls - but before I commit - can the globes be replaced or are they part of the reflector? And are they available in any other body colour apart from black with red rim? (black/blue or black/black would be nice). Do they also come with protective covers?
Comment
-
Originally posted by letsgoplaces View PostI'll take a photo in the next couple of days
Tek screws are your friend B) But only if you don't mind putting holes in the top of your bullbar :shock:
I figure i'll be keeping mine till pretty much death til do we part. I offered it to my 5 year old for when she starts driving, but she declined a free car cause it's not 'rainbow colours'
I'd probably decline on lack of rainbow colours too2011 150series GXL
Comment
-
-
Originally posted by amts View PostWooley, you want this
http://fourtreks.com/modular_horizontal_tab.html2011 150series GXL
Comment
-
Originally posted by amts View PostSo you want me to draw something up for you then?
I think I'll use the aerial type mounts and place a piece of flat steel between the welded on tabs already there to offer some support which I can bolt the light too also ... maybe.2011 150series GXL
Comment
Comment