LED park and indicator lights on a Sovereign bullbar

[Guest Close Guest]

Finally, success! Photos below are of the new Sovereign bullbar lights which consists of DRLs, parkers and indicators. Photos only show it in DRL mode - the dimmer photo is setting my camera phone with less exposure so the ring of DRL is more visible. I'll need to take more photos with a better camera. I still need to work out the lens diffuser for the lights and that should hopefully be it.

[pjorek Advanced Member Find all posts View Profile Close pjorek]

These are not the same ones you've sent out Andrew? Updated model?

[Guest Close Guest]

That's right. Didn't think the DRL version was going to happen back then. Then they turned up this week after building my own prototype, countless comms, fed them circuit diagrams, etc. Happy to work something out for previous 'customers'.

[pjorek Advanced Member Find all posts View Profile Close pjorek]

I'm happy with the ones I got previously ie Revision 1.0 don't really need DRL. Mind you I'm planning on installing 1.0 this weekend.

I'm guessing DRL turn on as soon as the engine is on AND the postition lights are off? Wonder how that's wired hmmm interesting

[Guest Close Guest]

Yeah, that was the hard bit to work out but I have made it all a pretty simple install. All the smarts is inside the light. All you need is a feed from ignition, which is available from the fusebox behind the battery and the other 3 wires are as per normal - ground, parker and indicator tapped from behind the connector at the headlights. So the only difference is the extra wire that is fed from the ignition. So as soon as the key is in the IGN position, the DRLs lights up. As soon as you turn on the parkers, the DRLs dim to act as parkers. The indicators are in the center cluster of LEDs.

[pjorek Advanced Member Find all posts View Profile Close pjorek]

Nice! Excellent Andrew

[macaroon1 Advanced Member Find all posts View Profile Close macaroon1]

I'm happy with the ones I got previously ie Revision 1.0 don't really need DRL.

x2. Amts..I'm happy with the version 1.0, although I did initially want DRL's I honestly don't feel like I need them as I don't do the kays!! I soldered my 3 wires to the original wires, although it was a bit tricky!! Good work tho with the chase!