I've done a search on the forum under "low beam" and couldn't find anything that seemed to match my problem so here goes. Have a 2008 120 D4D.
Noticed that both LH and RH low beams aren't working. Parking lights are fine and so is high beam. Pulled the wiring connector off the RH headlight and plugged it into a spare lamp. Same result, no low beam, high beam OK.
Both fuses that ARE present are OK. Legend on the inside of the fusebox indicates that I should have 4 fuses, one each for LH and RH low and high beam, I only seem to have the 2 high beam fuses in place. Can't see any fuses on the little panel under the dash to indicate they have anything to do with the lights.
As an aside and it may be related to the issue, should I be able to switch the parkers/headlamps on/off with no key in place? I'm not certain but seem to remember that headlights would go out when the key was removed. At present I can switch on and off at will with no key in place.
Any clues would be much appreciated!
Noticed that both LH and RH low beams aren't working. Parking lights are fine and so is high beam. Pulled the wiring connector off the RH headlight and plugged it into a spare lamp. Same result, no low beam, high beam OK.
Both fuses that ARE present are OK. Legend on the inside of the fusebox indicates that I should have 4 fuses, one each for LH and RH low and high beam, I only seem to have the 2 high beam fuses in place. Can't see any fuses on the little panel under the dash to indicate they have anything to do with the lights.
As an aside and it may be related to the issue, should I be able to switch the parkers/headlamps on/off with no key in place? I'm not certain but seem to remember that headlights would go out when the key was removed. At present I can switch on and off at will with no key in place.
Any clues would be much appreciated!
Comment