Roof-console wiring

[jarrah7rally Member Find all posts View Profile Close jarrah7rally]

Re: Roof-console wiring

Thanks for the photos guys,

Makes my job easier when I get around fitting up the console (when its ordered & delivered)

Running a dedicated power supply to the radio is cheap insurance also means can be hard wired off the ignition switch, but only onto the auxillary battery.

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

Hi,
For the people that installed a roof console with side airbags and ran a seprate positve cable, how did you run the positve down from the roof past the side airbags in the front side pillar trim??

Without the side airags, I presume you can take the trim off ok, but if you have side airbags it is still possible to remove the side pillar trim or will the airbags never go back in once the trim is off etc?
I presume I could use a piece of yellow-tongue but dont want to affect my airbag operation.

Also what size wire did you use, twin core 3.2mm?

Cheers

[Hazza Advanced Member Find all posts View Profile Close Hazza]

gumboot I found this if it helps.

http://i257.photobucket.com/albums/h...o/DSC00113.jpg
http://i257.photobucket.com/albums/h...o/DSC00112.jpg

Passenger Side
http://i257.photobucket.com/albums/h...o/DSC00111.jpg
http://i257.photobucket.com/albums/h...o/DSC00110.jpg

Drivers side
http://i257.photobucket.com/albums/h...o/DSC00112.jpg
http://i257.photobucket.com/albums/h...o/DSC00113.jpg

Hazza

[gumboot Avid PP Poster! Find all posts View Profile Close gumboot]

Thanks Harry,
Thats perfect, and exactly what I was after as I can see the trim can come away without affecting the airbags from those photos.
Cheers