Headlight adjustment

[Frank Gurdradee Lurker Find all posts View Profile Close Frank Gurdradee]

Thanks guys. Found it and just did the adjustment. the 8mm nut was the clue I was looking for. A small 8mm socket is probably best for this job, but I had to use a spanner (of all sockets my 8mm is missing!)

I just adjusted the "B" bolt which is the horizontal adjustment which did the trick. It is easiest to get to. "A" does the vertical adjustment. see the diagram. click on the file to see what I am talking about . Good luck

[Corigator Avid PP Poster! Find all posts View Profile Close Corigator]

And don't adjust too far. If its not moving as expected try the other screw bolt. If you go too far it will pop out of its hole and the light will go floppy.

Floppy is not good.

[Gldfishing Junior Member Find all posts View Profile Close Gldfishing]

My right headlight looked high. The light shape that angles up to the left was higher then the left light. When I adjusted it the horizontal line of the light does ot line up. I get two horizontal lines. Looks like I need to change it back.
Any other ideas why this is happening. or are the light like this normally.