G'day ROB83R, if you have a look at photo #3 in post number 11 the right angle piece is what I turned around. That normally goes into the rocker cover where I now have the braided looking hose to the catch can.
The right angle piece goes down to the inlet side of the turbo as you mentioned. Just used a small piece of metal tube to join it to the outlet from the catch can, hence the 2 hose clips
Hope this makes sense. Don't forget I have a 150 and am assuming it is the same under the intercooler on the 120.
Regards Geoff
The right angle piece goes down to the inlet side of the turbo as you mentioned. Just used a small piece of metal tube to join it to the outlet from the catch can, hence the 2 hose clips
Hope this makes sense. Don't forget I have a 150 and am assuming it is the same under the intercooler on the 120.
Regards Geoff
Comment