Custom Exhaust

[Bennyc2003 Lurker Find all posts View Profile Close Bennyc2003]

Hey guys

Hi I am new to this forum so Firstly hello

I would like to know if anyones put on a 3" exhaust or made any mods to there exhaust. I have been quoted on a exhaust from baudesert exhausts and was keen to know how much it does improve performance ie fuel and power. I think the quote was about $1200 for a 2008 d4d auto

Any suggestions or experiences would be appreciated. I hope I posted this in the correct spot

Cheers guys
Regards
Ben

[winniliss Avid PP Poster! Find all posts View Profile Close winniliss]

Welcome Ben,

Have a look at the following link:

https://www.google.com.au/search?hl=...pradopoint.com

Look at the green writing under the heading it will tell you what section in the forum it is. You need to look for 120 series. Here you will find a bit of information that may answer your question.

[Smithy - 120 D4D Senior Member Find all posts View Profile Close Smithy - 120 D4D]

Hey guys

Hi I am new to this forum so Firstly hello

I would like to know if anyones put on a 3" exhaust or made any mods to there exhaust. I have been quoted on a exhaust from baudesert exhausts and was keen to know how much it does improve performance ie fuel and power. I think the quote was about $1200 for a 2008 d4d auto

Any suggestions or experiences would be appreciated. I hope I posted this in the correct spot

Cheers guys
Regards
Ben

Hi Ben, plenty of info on here about exhausts, but i will make one comment for you... I have a 3" Sterling system, and don't believe that fuel consumption has improved, but have gained a noticeable improvement in power at lower revs, and particularly lower gears.

I reckon the quote price you got for beaudesert is a good price, but don't they only do a 2.75" system?

[cfryback Find all posts View Profile Close cfryback]

Check these guys out - http://www.berrimadiesel.com/eshop/i...exhaust-Toyota

[Bennyc2003 Lurker Find all posts View Profile Close Bennyc2003]

Hey guys thanks for the help yer my bad its 2 3/4 pipe

[macaroon1 Advanced Member Find all posts View Profile Close macaroon1]

FWIW I've the old 1KZ-TE with a 2.75" Beaudesert starting from the dump pipe with a straight through muffler. Getting quotes they all said if I was going to get a chip down the track then I needed one..(a bigger pipe). I'm sure a Beaudesert exhaust would really help utilise the full extent of your chip though although you would be looking at @another $900?? I was quoted @6% better performance and @3% better fuel economy! Certainly drives a lot better now!

They do both a 3" and 2.75 but recommend the smaller for the KZ-TE. They are one of the few to do this size.

Go for it, it's made my beast more responsive. My figs are for the KZ, I reckon the D4D would be similar. The D4D is actually easier to fit as the dump pipe bolts are far more accessible. The KZ's are hidden away.