Blocked pickup screen - Sump sealant?

[mgreen18 Junior Member Find all posts View Profile Close mgreen18]

Hi guys,

Was doing my 5,000km oil change and came across a blocked pick up screen, vehicle is a kdj120r

I have to wait to get it in for further analysis to see what has caused the blockage
In the meant time so I can drive it to the workshop going to drop the sump and give it a clean up

Just wondering what the sealant product is called, and do I want to get this from Toyota or just go to repco?
Also there is mention of a gasket as part of the oil strainer sub-assembly, do I need to put in a new gasket or can I reuse the original?

Thanks
Matt

[Anth120playdo Banned Find all posts View Profile Close Anth120playdo]

Hi guys,

Was doing my 5,000km oil change and came across a blocked pick up screen, vehicle is a kdj120r

I have to wait to get it in for further analysis to see what has caused the blockage
In the meant time so I can drive it to the workshop going to drop the sump and give it a clean up

Just wondering what the sealant product is called, and do I want to get this from Toyota or just go to repco?
Also there is mention of a gasket as part of the oil strainer sub-assembly, do I need to put in a new gasket or can I reuse the original?

Thanks
Matt

Repco.
Grey Maxx.

Re-use is fine.

The blockage is caused by blow by.
Do you have baileys Injectors?
Brass washers, no good.
July 2014 to may 2016.


http://www.pradopoint.com/showthread...560#post556560

[mgreen18 Junior Member Find all posts View Profile Close mgreen18]

double post...

[mgreen18 Junior Member Find all posts View Profile Close mgreen18]

The blockage is caused by blow by.
Do you have baileys Injectors?
Brass washers, no good.
July 2014 to may 2016.

Thanks ####
I'd prefer not to comment on injectors at this stage till I have more information and it has been into the workshop, but my injectors of the 'unknown' brand were installed between those dates
I have dropped the sump and from a shiny clean pickup screen 5,000km ago to now, it does not look pretty.......

[stanmiko Member Find all posts View Profile Close stanmiko]

Thanks ####
I'd prefer not to comment on injectors at this stage till I have more information and it has been into the workshop, but my injectors of the 'unknown' brand were installed between those dates
I have dropped the sump and from a shiny clean pickup screen 5,000km ago to now, it does not look pretty.......

Oh, dear. 5k and oil pick up screen contaminated already...

[Anth120playdo Banned Find all posts View Profile Close Anth120playdo]

http://www.pradopoint.com/showthread...560#post556560

[mgreen18 Junior Member Find all posts View Profile Close mgreen18]

Ok guys,

Bailey Injectors, 30,000km old

[mgreen18 Junior Member Find all posts View Profile Close mgreen18]

What the Injectors looked like, took a couple of hours just to get one of them out

[Anth120playdo Banned Find all posts View Profile Close Anth120playdo]

What the Injectors looked like, took a couple of hours just to get one of them out

This is what I have been dealing with for months now.
I have not had 3 in one engine, with blow by. Not good if they were left alone.
I have had a few that took hours to get out.
Lucky you got them out in time.

[Anth120playdo Banned Find all posts View Profile Close Anth120playdo]

http://www.pradopoint.com/showthread...-new-DLC-DENSO

Some feedback here.

Check oil pickups. Very important.

[Anth120playdo Banned Find all posts View Profile Close Anth120playdo]

For some checking pickups is urgent.

Another day another.....










This set were installed this year!
Massive blow by right away, due to the brass washers not sealing off.

Note: a full diagnostic before the washer change out to check if injectors seem ok.
*In most cases we are able to save injectors. Save you & or suppliers $$$$.

THIS ENGINE WOULD HAVE BEEN LUCKY TO MAKE CHRISTMAS, likely a month & bye bye.