Tweet
Fitted the new mud flaps (finally), swapped the Optima batteries around, oil change and new filter for the Racor.
-
Dave
Views expressed are mine alone and are not intended to compromise the integrity of my employer nor offend those who may read such views.
Bugger Bali, get out and see Australia before we sell it all to China. -
Preparation is minimal, just remove any loose dirt or anything flaking, pressure wash would be ideal.Originally posted by Beach View Post
Best applied with the correct body Schutz spray gun, this stuff is really thick and gooey so would block a normal spray gun. Obviously you need a compressor as well.
Really just a point and shoot job, cover or mask what you don't want covered and go for it.
Cheers Andrew[COLOR="#FF0000"]So Long and Thanks for all the Fish![/COLOR]
[url=http://www.4wdadventurers.com/showthread.php?3840-AJ-s-120-Prado]MY PRADO AND DIY CAMPER TRAILER[/url]
[url=http://www.4wdadventurers.com/showthread.php?3975-AJ-s-79-series-Cruiser-Ute]MY HZJ79 Landcrusier[/url]
[SIGPIC][/SIGPIC]Comment
-
Installed a GME tx3340 only to find it didn't work so pulled it out. Installed a reverse camera, and installed a rear work light bracket to space the wheel carrier out.Comment
-
Pulled out single rear seat seat and made brackets to secure 2nd Engel behind passengers seat, and did a test fit of all the camping gear in the back.
Fitted 2nd 12 volt outlet in back of centre consol for running various appliances and chargers etc
2 weeks until leave for Mitchell FallsCheers
Daz
2004 TD GXL Auto PradoComment
-
Hey Daz, gotta pic of the 12v power? What did you link it to?
Sent from my iPhone using TapatalkCheers, Leon
There's no such thing as a wrong turn... it's just the scenic route!
1998 VX Grande 95... gone, 2008 GXL 120... almost gone... 2017 GXL 150... blank canvas
Optix PhotographixComment
-
Bought two new batteries. Installed cranking battery. Started removing excess wiring and figuring out how to wire aux battery into the back.
(Complete re-wiring needed due to the stupid way the previous owner decided to install the second battery. He insisted he was correct despite killing four batteries)Comment
-
As per my build up, installed a LED Lightbar.[FONT=Century Gothic][B][SIZE=4][URL="http://www.pradopoint.com.au/showthread.php?36057-Ryback-s-Flinders-Red-120"][COLOR="#B22222"]'04 120 Petrol Flinders Red GXL[/URL][/COLOR][/B][/FONT][/SIZE]
with ARB Catalog, with TJM add ons!
[CENTER][SIGPIC][/SIGPIC][/CENTER]Comment
-
Hi SnaggaOriginally posted by Snaga View Post
I ran Aux power into the centre consol ages ago, but only installed 1 x outlet. Dont know why I didnt fit 2, as kids have often wrestled to use the power on longer trips to charge gadgets etc, so thought would do it now even though only 1 x daughter coming on our Gibb Trip. Finally got around to it.
Its supplied from an Aux power relay from 2nd battery that also supplies rear inside Anderson plug for Inverter, rear external Anderson plug, 2 way and rear Engel supply plug.
I have a 2nd Aux relay that supplies 2nd rear Anderson plug for camper.
All done in 6mm cable
Same relay supplies this plug and the Anderson plug for inverter
Finally, also installed a cheapie 3 way outlet for our phones etc. Just used velcro to secure as will only be for this trip.
I like having plenty power options on boardCheers
Daz
2004 TD GXL Auto PradoComment
-
Fitted my light bar 33inch Britelight,
PradoPoint GTG 2014 - Iconic High Country - Victoria
Big Thanks to Our Sponsors
ARB 4x4 Accessories, Dobinsons Spring & Suspension, BCF, Terrain Tamer , ORU , MAXTRAX, REDARC , Kaymar & Opposite LockComment
-
Finally got the ticking noise fixed - Leaking gasket between extractors and cat.2007 GXL V6 - ARB Bullbar with LED lights, snorkel, extractors, 2 1/4" dual exhaust, K&N filter, dimpled/slotted rotors, headrest dvd players, Ebay Satnav/reverse camera, GME 3100TX, Tigerz11 Side awning on custom brackets with Maxtrax mounts, 300W Invertor, ARB Underbody protection, Lightbar and STZ 265/70 tyres.
Wish list in order I'll get them: Sliders, 2" lift, E-locker, Winch bar with winch.Comment
-
Can I ask how you ran the cable?Originally posted by big-trev View PostFitted my light bar 33inch Britelight,
Comment
-
finally fitted my ARB LED indicator/parks into the bullbar. Discovered cracks in the lower mounting tabs on cover plates under the wings of the bullbar so got them welded today.Dave
Views expressed are mine alone and are not intended to compromise the integrity of my employer nor offend those who may read such views.
Bugger Bali, get out and see Australia before we sell it all to China.Comment
-
Fitted my synthetic rope and alloy hawse
dropped number plate bolt into bash plate area.. that can wait for the weekend...120 GXL, D4D Auto 2007 - ARB Deluxe Bar, Warn Tabor 10K and Rec Kit, Safari Snorkel, GME UHF, BFG AT's, Lightforce Spots, Eclipse Sat Nav, Waeco CF40, Optima D27, Redarc Sbi12, Leigh W Diode, Voltmeters, Rhino Pioneer platform, ARB compressor, DIY Trek Table & drawers, HiLux Jets, Breathers, Water pump, rear custom fused electrical system, camp lights, LED's, ARB Roof top tent Annex and Awning, Maxtrax, Hi-Lift, Shovel. [URL="http://www.pradopoint.com/showthread.php?27929-DJ-D-s-D4D-120-GXL"]My Build Thread[/URL]Comment
-
Where did you get your Offset Hawse from dj? (& how much?)2004 V6 Grande. BLACK -Comment
-
Finished my awning and Maxtrax holders and resprayed passenger side silver panels around air con etc as a car air freshener leaked and ate the plastic.
Before:
https://dl.dropboxusercontent.com/u/.../Resprayed.jpg
After:
https://dl.dropboxusercontent.com/u/.../Resprayed.jpg2007 GXL V6 - ARB Bullbar with LED lights, snorkel, extractors, 2 1/4" dual exhaust, K&N filter, dimpled/slotted rotors, headrest dvd players, Ebay Satnav/reverse camera, GME 3100TX, Tigerz11 Side awning on custom brackets with Maxtrax mounts, 300W Invertor, ARB Underbody protection, Lightbar and STZ 265/70 tyres.
Wish list in order I'll get them: Sliders, 2" lift, E-locker, Winch bar with winch.Comment
Snaga
Comment